Operation Manual

Voice Setting
Voice Language Setting: In clock
display mode you can select the
voice language by keeping on
press the button M. Now LCD
twinkles L0, L1,L2,…..Ln ( n
means the number of language.)
circularly.L0 represents closing
voice function, L1 represents
language 1, L2 represents
language 2, … Ln represents
language n and so on. The
monitor will speak out the
corresponding
language name of
the displayed
language code.
You can select the
wanted language
by releasnig button M when
display the corresponding
language.
Voice Volume Setting: You can
select the voice volume by
keeping on press the button M
again after language setting. Now
the bars on LCD
change and
number of the bars
indicates the
volume. You can
select the wanted
volume by releasing button M
when display the corresponding
bars.
Cuff Connecting
Be sure there is no leakage when
placing the rubber tube plug of
cuff socket.
Put the end of cuff through metal
hoop. Make sure that the two
nylon outlets are located on the
outside surface of the cuff.
18