Operation Manual

24
AFTER USE
GB
1- Unplug and turn off the vacuum. Pull out the dust cup. Lift
the filter frame out from the top of the dust cup. Remove the
two filter layers from the filter frame.
2- Thoroughly rinse the two filter in lukewarm water. Squeeze
out any excess water. Air dry for 24 hours before using.
3- Insert a dry filter set into the filter frame.
Cleaning and
Maintenance
1- Place your foot lightly on the top of the base. Tilt handle
back to activate steam pump.
2- Push handle upright to stop steam.
CAUTION:
Never leave the steam mop with a damp/wet
micro-fiber pocket on any floor surface for any amount
of time as this may damage the floor.
NOTICE:
Fill anytime throughout the cleaning process.
NOTICE:
Do not leave the appliance unattended when
plugged in.