Operation Manual

Unit Dimension : 80 x 120 x 40

Type BF apparatus

This device conforms to the following standards:

DIN EN 60601-1: 3/96 “Medical electrical equipment”

Part 1: General requirements for safety

DIN EN 1060-1: 12/95, AMD 1 09/02 “Non-invasive

sphygmomanometers”

Part 1: General requirements

DIN EN 1060-3: 9/97 “Non- invasive

sphygmomanometers”

Part 3: Supplementary requirements for electro-

mechanical blood pressure measuring systems

USING THIS PRODUCT

Before Use

Installing / Replacing Batteries

1-Insert the batteries into the battery compartment

matching correct polarities "+" and "-".

2- Replace all batteries if the low battery indicator appears.

3-Remove the batteries if the device will not be used for

a long period of time.

Note: It is recommended that the same type of alkaline

batteries be used to avoid incompatibility.

Attaching the Pressure Cuff

1-Wrap the cuff around bareskinned left arm.