Datasheet

3 www.fairchildsemi.com
MOC3031M, MOC3032M, MOC3033M, MOC3041M, MOC3042M, MOC3043M Rev. 1.0.1
MOC3031M, MOC3032M, MOC3033M, MOC3041M, MOC3042M, MOC3043M 6-Pin DIP Zero-Cross Optoisolators Triac Driver Output (250/400 Volt Peak)
Zero Crossing Characteristics (T
A
= 25°C Unless otherwise specified.)
Note
1. Test voltage must be applied within dv/dt rating.
2. All devices are guaranteed to trigger at an I
F
value less than or equal to max I
FT
. Therefore, recommended operating I
F
lies between max I
FT
(15 mA for MOC3031M & MOC3041M, 10 mA for MOC3032M & MOC3042M, 5 mA for MOC3033M & MOC3043M) and absolute max I
F
(60 mA).
3. This is static dv/dt. See Figure 9 for test circuit. Commutating dv/dt is a function of the load-driving thyristor(s) only.
Characteristics Test Conditions Symbol Device Min Typ Max Units
Inhibit Voltage I
F
= rated I
FT
, MT1-MT2 voltage
above which device will not trigger
off-state
V
IH
All 20 V
Leakage in Inhibited State I
F
= rated I
F
, rated V
DRM
, off-state I
DRM2
All 500 µA