Datasheet

ManualsBrandsFairchild ManualsHigh Speed / Logic OptocouplersOptocoupler 1 MBit/s DIL-6

DESCRIPTION

The H11LX series has a high speed integrated circuit

detector optically coupled to a gallium-arsenide infrared

emitting diode. The output incorporates a Schmitt trig-

ger, which provides hysteresis for noise immunity and

pulse shaping. The detector circuit is optimized for sim-

plicity of operation and utilizes an open collector output

for maximum application flexibility.

6-PIN DIP

OPTOISOLATORS LOGIC OUTPUT

H11L1M H11L2M H11L3M

APPLICATIONS

• Logic to logic isolator

• Programmable current level sensor

• Line receivereliminate noise and transient problems

• A.C. to TTL conversionsquare wave shaping

• Digital programming of power supplies

• Interfaces computers with peripherals

FEATURES

• High data rate, 1 MHz typical (NRZ)

• Free from latch up and oscilliation throughout voltage

and temperature ranges.

• Microprocessor compatible drive

• Logic compatible output sinks 16 mA at 0.4 V maximum

• Guaranteed on/off threshold hysteresis

• Wide supply voltage capability, compatible with all

popular logic systems

• Underwriter Laboratory (UL) recognizedfile #E90700

5 GND

ANODE

CATHODE

SCHEMATIC

Parameters Symbol Device Value Units

TOTAL DEVICE

STG

All -55 to +150 °C

Storage Temperature

Operating Temperature T

OPR

All -40 to +85 °C

Lead Solder Temperature T

SOL

All 260 for 10 sec °C

Total Device Power Dissipation @ 25°C

All

250 mW

Derate Above 25°C 2.94 mW/°C

EMITTER

All 60 mA

Continuous Forward Current

Reverse Voltage V

All 6 V

Forward Current - Peak (1 µs pulse, 300 pps) I

(pk) All 3.0 A

LED Power Dissipation 25°C Ambient

All

120 mW

Derate Linearly From 25°C 1.41 mW/°C

DETECTOR

Detector Power Dissipation @ 25°C

All

150 mW

Derate Linearly from 25°C 2.0 mW/°C

Allowed Range V

All 0 to 16 V

Allowed Range V

All 3 to 16 V

Output Current I

All 50 mA



2001 Fairchild Semiconductor Corporation

DS300222 11/01/01 1 OF 8 www.fairchildsemi.com

ABSOLUTE MAXIMUM RATINGS

Summary of content (8 pages)

PAGE 1
6-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M H11L3M DESCRIPTION The H11LX series has a high speed integrated circuit detector optically coupled to a gallium-arsenide infrared emitting diode. The output incorporates a Schmitt trigger, which provides hysteresis for noise immunity and pulse shaping. The detector circuit is optimized for simplicity of operation and utilizes an open collector output for maximum application flexibility.
PAGE 2
6-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M ELECTRICAL CHARACTERISTICS H11L3M (TA = 25°C Unless otherwise specified.) INDIVIDUAL COMPONENT CHARACTERISTICS Parameters Test Conditions Symbol Device VF All Min Typ Max 1.2 1.5 0.75 1.0 Units EMITTER Input Forward Voltage Reverse Current Capacitance IF = 10 mA IF = 0.3 mA VR = 3 V V IR All 10 µA CJ All 100 pF VCC All 15 V IF = 0, VCC = 5V ICC(off) All IF = 0, VCC = VO = 15V IOH All V = 0, f = 1.
PAGE 3
6-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M H11L3M TRANSFER CHARACTERISTICS DC Characteristics Supply Current Output Voltage, low Turn-On Threshold Current Test Conditions Symbol Device Typ Max Units IF = 10mA, VCC = 5V ICC(on) All 1.6 5.0 mA R L =270Ω ,V CC =5V,I F =I F(on) max. VOL All 0.2 0.4 V RL = 270Ω, VCC = 5V IF(on)* Min H11L1M 1.6 H11L2M 10.0 H11L3M 5.0 Turn-Off Threshold Current RL = 270Ω, VCC = 5V IF(off) All 0.3 1.
PAGE 4
6-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M C I6 VIN 5V 5V IF 50% 0 1 RE H11L1 6 RL 4 VIN VO toff ton µSEC tr = tf = 0.01 Z = 50Ω H11L3M 5 2 10% VO 90% tf tr Figure 1. Switching Test Circuit and Waveforms Figure 2. Transfer Characteristics Figure 3. Threshold Current vs. Supply Voltage VCC= 5V RL = 270 Ω TA = 25°C V OH 5 O V - OUTPUT VOLTAGE (V) IF - THRESHOLD CURRENT (NORMALIZED) 6 4 I F(OFF) I F(ON) 3 2 1 V OL 0 0 1 2 1.
PAGE 5
6-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M H11L3M Figure 6. Supply Current vs. Supply Voltage Figure 7. LED Forward Voltage vs. Forward Current 1.8 TA = 0 oC 5 IF = 5mA 1.7 25 oC 70oC VF - FORWARD VOLTAGE (V) IC - SUPPLY CURRENT (mA) 6 4 3 2 o TA = 0oC 25oC 70 C 1 IF = 0mA 1.6 1.5 1.4 TA = 55˚C 1.3 TA = 25˚C 1.2 TA = 100˚C 0 0 2 4 6 8 10 12 14 16 1.1 VCC - SUPPLY VOLTAGE (V) 1.0 1 10 100 IF - LED FORWARD CURRENT (mA) DS300222 11/01/01 5 OF 8 www.fairchildsemi.
PAGE 6
-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M Package Dimensions (Through Hole) H11L3M Package Dimensions (Surface Mount) 0.350 (8.89) 0.320 (8.13) 0.350 (8.89) 0.320 (8.13) 0.260 (6.60) 0.240 (6.10) 0.070 (1.77) 0.040 (1.02) 0.260 (6.60) 0.240 (6.10) 0.070 (1.77) 0.040 (1.02) 0.320 (8.13) 0.014 (0.36) 0.010 (0.25) 0.320 (8.13) 0.014 (0.36) 0.010 (0.25) 0.200 (5.08) 0.115 (2.93) 0.200 (5.08) 0.115 (2.93) 0.100 (2.54) 0.015 (0.38) 0.012 (0.30) 0.008 (0.20) 0.025 (0.63) 0.020 (0.51) 0.
PAGE 7
6-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M H11L3M ORDERING INFORMATION Option/Order Entry Identifier Description S Surface Mount Lead Bend SR2 Surface Mount; Tape and reel T 0.4” Lead Spacing V VDE 0884 TV VDE 0884, 0.4” Lead Spacing 5V VDE 0884, Surface Mount SR2V VDE 0884, Surface Mount, Tape & Reel Carrier Tape Specifications (“D” Taping Orientation) 12.0 ± 0.1 4.5 ± 0.20 2.0 ± 0.05 0.30 MAX 4.0 ± 0.1 Ø1.5 MIN 1.75 ± 0.10 11.5 ± 1.0 24.0 ± 0.3 21.0 ± 0.1 9.1 ± 0.20 0.
PAGE 8
6-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M H11L3M DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.