Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsLogic ICsLogic IC - Inverter Inverter 7WZ MicroPak 6

June 2011

NC7WZ14 • Rev. 1.0.7

NC7WZ14 — TinyLogic

UHS Dual Inverter with Schmitt Trigger Inputs

NC7WZ14

TinyLogic

UHS Dual Inverter with Schmitt Trigger

Inputs

Features

 Ultra-High Speed: t

3.2ns (Typical) into 50pF at

5V V

 High Output Drive: ±24mA at 3V V

 Broad V

Operating Range: 1.65V to 5.5V

 Matches Performance of LCX when Operated at

3.3V V

 Power Down High Impedance Inputs/Outputs

 Over-Voltage Tolerance Inputs Facilitate 5V to 3V

Translation

 Proprietary Noise/EMI Reduction Circuitry

 Ultra-Small MicroPak™ Packages

 Space-Saving SC70 Package

Description

The NC7WZ14 is a dual inverter with Schmitt trigger input

from Fairchild's Ultra-High Speed (UHS) Series of

TinyLogic. The device is fabricated with advanced CMOS

technology to achieve ultra-high speed with high output

drive while maintaining low static power dissipation over a

very broad V

operating range. The device is specified to

operate over the 1.65V to 5.5V V

range. The inputs and

outputs are high-impedance when V

is 0V. Inputs

tolerate voltages up to 7V independent of V

operating

voltage. Schmitt trigger inputs achieve typically 1V

hysteresis between the positive-and negative-going input

threshold voltage at 5V.

Ordering Information

Part Number

Operating

Temperature

Top

Mark

Package

Packing

Method

NC7WZ14P6X -40 to +85°C Z14 6-Lead SC70, EIAJ SC-88a, 1.25mm Wide

3000 Units on

Tape & Reel

NC7WZ14EP6X -40 to +125°C Z14 6-Lead SC70, EIAJ SC-88a, 1.25mm Wide

3000 Units on

Tape & Reel

NC7WZ14L6X -40 to +85°C A9 6-Lead MicroPak™, 1.00mm Wide

5000 Units on

Tape & Reel

NC7WZ14FHX -40 to +85°C A9 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch

5000 Units on

Tape & Reel

Summary of content (9 pages)

PAGE 1
NC7WZ14 TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs Features Description  Ultra-High Speed: tPD 3.2ns (Typical) into 50pF at 5V VCC    High Output Drive: ±24mA at 3V VCC   Power Down High Impedance Inputs/Outputs The NC7WZ14 is a dual inverter with Schmitt trigger input from Fairchild's Ultra-High Speed (UHS) Series of TinyLogic.
PAGE 2
IEEC/IEC Figure 1. Logic Symbol Pin Configurations Figure 2. SC70 (Top View) A1 1 6 Y1 GND 2 5 VCC A2 3 4 Y2 Figure 3. MicroPak (Top Through View) AAA Pin One Notes: 1. AAA represents Product Code Top Mark (see ordering code). 2. Orientation of Top Mark determines Pin One location. Read the top product code mark left to right. Pin One is the lower left pin. Figure 4.
PAGE 3
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit VCC Supply Voltage -0.5 7.0 V VIN DC Input Voltage -0.5 7.0 V VOUT 7.
PAGE 4
Symbol Parameter VCC (V) TA=-40 to +85°C TA=+25°C Conditions Min. Typ. Max. VP VN VH Positive Threshold Voltage Negative Threshold Voltage Hysteresis Voltage 0.60 1.40 0.60 1.40 0.60 1.40 1.50 0.70 1.50 0.70 1.50 2.30 1.00 1.80 1.00 1.80 1.00 1.80 3.00 1.30 2.20 1.30 2.20 1.30 2.20 4.50 1.90 3.10 1.90 3.10 2.00 3.20 5.50 2.20 3.60 2.20 3.60 2.30 3.70 1.65 0.20 0.50 0.80 0.20 0.80 0.30 0.90 1.80 0.25 0.56 0.90 0.25 0.90 0.35 1.00 2.30 0.
PAGE 5
Symbol Parameter VCC (V) TA=+25°C Conditions TA=-40 to +85°C TA=-40 to +125°C Units Figure Min. Typ. Max. Min. Max. Min. Max. 1.65 2.5 7.6 13.1 2.5 14.5 2.5 14.7 1.80 2.5 6.3 10.9 2.5 12.0 2.5 12.3 1.8 4.3 7.4 1.8 8.1 1.8 8.4 3.30 ± 0.30 1.5 3.3 5.0 1.5 5.5 1.5 5.8 5.00 ± 0.50 1.0 2.7 4.1 1.0 4.5 1.0 4.8 3.30 ± 0.30 CL=50pF, 5.00 ± 0.50 RL=500 1.8 4.0 6.0 1.8 6.6 1.8 6.9 1.2 3.2 4.9 1.2 5.4 1.2 5.7 2.50 ± 0.
PAGE 6
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs Physical Dimensions SYMM C L 2.00±0.20 0.65 A 0.50 MIN 6 4 B PIN ONE 1.25±0.10 1 1.90 3 0.30 0.15 (0.25) 0.40 MIN 0.10 0.65 A B 1.30 LAND PATTERN RECOMMENDATION 1.30 1.00 0.80 SEE DETAIL A 1.10 0.80 0.10 C 0.10 0.00 C 2.10±0.30 SEATING PLANE NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE (R0.10) 0.25 0.10 0.20 A) THIS PACKAGE CONFORMS TO EIAJ SC-88, 1996. B) ALL DIMENSIONS ARE IN MILLIMETERS.
PAGE 7
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs Physical Dimensions 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.254) (0.49) 5X 1.00 (0.75) PIN 1 IDENTIFIER 5 (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C 0.25 0.15 6X 1.0 DETAIL A 0.10 0.05 0.45 0.35 0.10 0.00 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 0.5 (0.05) 6X BOTTOM VIEW DETAIL A PIN 1 TERMINAL 0.075 X 45 CHAMFER (0.13) 4X Notes: 1.
PAGE 8
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs Physical Dimensions 0.89 0.35 0.05 C 1.00 2X B A 5X 0.40 PIN 1 MIN 250uM 0.66 1.00 1X 0.45 6X 0.19 0.05 C TOP VIEW RECOMMENDED LAND PATTERN FOR SPACE CONSTRAINED PCB 2X 0.90 0.05 C 0.35 0.55MAX C 5X 0.52 SIDE VIEW 0.73 (0.08) 4X 1 DETAIL A 2 1X 0.57 0.09 0.19 6X 3 0.20 6X ALTERNATIVE LAND PATTERN FOR UNIVERSAL APPLICATION (0.05) 6X 5X 0.35 0.25 6 5 4 0.35 0.60 (0.08) 4X 0.10 .05 C C B A 0.40 0.
PAGE 9
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs © 1999 Fairchild Semiconductor Corporation NC7WZ14 • Rev. 1.0.7 www.fairchildsemi.