Datasheet
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7SP08 • Rev. 1.0.4 3
NC7SP08 — TinyLogic
®
ULP Two-Input AND Gate
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol Parameter Min. Max. Unit
V
CC
Supply Voltage -0.5 4.6 V
V
IN
DC Input Voltage -0.5 4.6 V
V
OUT
DC Output Voltage
HIGH or LOW State
(4)
-0.5 V
CC
to +0.5 V
V
CC
=0V -0.5 4.6 V
I
IK
DC Input Diode Current at V
IN
< 0V -50 mA
I
OK
DC Output Diode Current
V
OUT
< 0V -50
mA
V
OUT
> V
CC
+50
I
OH
/ I
OL
DC Output Source/Sink Current ±50 mA
I
CC
or Ground DC V
CC
or Ground Current per Supply Pin ±50 mA
T
STG
Storage Temperature Range -65 +150 °C
T
J
Junction Temperature Under Bias +150 °C
T
L
Junction Lead Temperature (Soldering, 10 Seconds) +260 °C
P
D
Power Dissipation at +85°C
SC70-5 150
mW MicroPak™-6 130
MicroPak2™-6 120
ESD
Human Body Model JEDEC: JESD22-A114 4000
V
Charged Device Model JEDEC: JESD22-C101 2000
Note:
4. The I
O
maximum rating must be observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol Parameter Conditions Min. Max. Unit
V
CC
Supply Voltage 0.9 3.6 V
V
IN
Input Voltage
(5)
0 3.6 V
V
OUT
Output Voltage
HIGH or LOW State 0 V
CC
V
V
CC
=0V 0 3.6
I
OH
/ I
OL
Output Current in I
OH
/ I
OL
V
CC
=3.0V to 3.6V ±2.6
mA
V
CC
=2.3V to 2.7V ±2.1
V
CC
=1.65V to 1.95V ±1.5
V
CC
=1.40V to 1.60V ±1.0
V
CC
=1.10V to 1.30V ±0.5
V
CC
=0.9V 20.0 µA
T
A
Free Air Operating Temperature -40 +85 °C
Δt / ΔV
Minimum Input Edge Rate V
IN
=0.8V to 2.0V, V
CC
=3.0V 10 ns/V
θ
JA
Thermal Resistance
SC70-5 425
°C/W
MicroPak™-6 500
MicroPak2™-6 560
Note:
5. Unused inputs must be held HIGH or LOW. They may not float.