Datasheet

December 2010
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7SP08 • Rev. 1.0.4
NC7SP08 — TinyLogic
®
ULP Two-Input AND Gate
NC7SP08 — TinyLogic
®
ULP Two-Input AND Gate
Features

0.9V to 3.6V V
CC
Supply Operation
 3.6V Over-Voltage Tolerant I/Os at V
CC
from
0.9V to 3.6V
 Propagation Delay (t
PD
):
 2.5ns Typical for 3.0V to 3.6V V
CC
 5.0ns Typical for 2.3V to 2.7V V
CC
 6.0ns Typical for 1.65V to 1.95V V
CC
 7.0ns Typical for 1.40V to 1.60V V
CC
 11.0ns Typical for 1.10V to 1.30V V
CC
 27.0ns Typical for 0.90V V
CC
 Power-Off High-Impedance Inputs and Outputs
 Static Drive (I
OH
/I
OL
):
 ± 2.6mA at 3.00V V
CC
 ± 2.1mA at 2.30V V
CC
 ± 1.5mA at 1.65V V
CC
 ± 1.0mA at 1.40V V
CC
 ± 0.5mA at 1.10V V
CC
 ± 20µA at 0.9V V
CC
 Quiet Series™ Noise / EMI Reduction Circuitry
 Ultra Small MicroPak™ Packages
 Ultra Low Dynamic Power
Description
The NC7SP08 is a single two-input AND gate from
Fairchild’s Ultra Low Power (ULP) series of TinyLogic®.
Ideal for applications where battery life is critical, this
product is designed for ultra low power consumption
within the V
CC
operating range of 0.9V to 3.6V.
The internal circuit is composed of a minimum of
inverter stages, including the output buffer, to enable
ultra low static and dynamic power.
The NC7SP08, for lower drive requirements, is uniquely
designed for optimized power and speed and is
fabricated with an advanced CMOS technology to
achieve best-in-class speed of operation, while
maintaining extremely low CMOS power dissipation.
Ordering Information
Part Number Top Mark Package Packing Method
NC7SP08P5X P08 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3000 Units on Tape & Reel
NC7SP08L6X J9 6-Lead MicroPak™, 1.00mm Wide 5000 Units on Tape & Reel
NC7SP08FHX J9 6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch 5000 Units on Tape & Reel
Notes:
1. TinyLogic ULP and ULP-A with up to 50% less
power consumption can extend battery life
significantly.
2. Battery Life=(V
battery
x I
battery
x 0.9) / (P
device
) /
24hrs/day; where, P
device
=(I
CC
x
V
CC
) + (C
PD
+ C
L
)
x V
CC
2
x f.
3. Assumes ideal 3.6V Lithium Ion battery with
current rating of 900mAH and derated 90% and
device frequency at 10MHz, with C
L
=15pF load.
Figure 1. Battery Life vs. V
CC
Supply Voltage