Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsPhotodiodes & PhototransistorsPhototransistor SMD-2

KDT00030 / KDT00030A — Phototransistor Photo Detector

KDT00030 / KDT00030A Rev. 1.1.0 1

June 2013

KDT00030 / KDT00030A

Phototransistor Photo Detector

Features

• Spectral Response Close to Human Eye

• Good Output Linearity Across Wide Illumination Range

• Small Footprint: 1.7 mm x 0.8 mm

• Low Profile: 0.6 mm

• Phototransistor with Filter Technology

Applications

• Cell Phones, Notebook PCs, PDAs, Digital Still

Cameras

Ordering Information

Part Number Operating Temperature Package Packing Method

KDT00030TR

-40 to +85°C

ChipLED Tape and Reel

KDT00030ATR ChipLED Tape and Reel

Description

The KDT00030 / KDT00030A are small, low-profile photo

detectors. They incorporate a phototransistor detector

chip, which makes them an ideal choice for low-cost

ambient light measurement applications, like mobile

appliances backlighting.

Summary of content (6 pages)

PAGE 1
KDT00030 / KDT00030A Phototransistor Photo Detector Features Description • • • • • The KDT00030 / KDT00030A are small, low-profile photo detectors. They incorporate a phototransistor detector chip, which makes them an ideal choice for low-cost ambient light measurement applications, like mobile appliances backlighting. Spectral Response Close to Human Eye Good Output Linearity Across Wide Illumination Range Small Footprint: 1.7 mm x 0.8 mm Low Profile: 0.
PAGE 2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max.
PAGE 3
10 TA = 25°C, VCC = 5V Flourescent Light Incandescent Lamp 1 Output Voltage, VO (V) Output Current (mA) 10 1 0.1 0.01 0.1 0.01 1E-3 1E-4 1E-5 TA = 25°C Flourescent Light, RL = 1kΩ Flourescent Light, RL = 7.5kΩ Flourescent Light, RL = 75kΩ 1E-6 1 10 100 1000 Illuminance Ev (Lux) 1E-7 0.1 10000 1 10 100 1000 10000 Illuminance Ev (Lux) Figure 2. Illuminance vs. Output Voltage Figure 1. Illuminance vs.
PAGE 4
ChipLED Green Paint 0.4 0.8±0.2 1.2±0.1 1.7±0.1 Recommended Solder Screen Pattern (for reference only) 0.18±0.05 1.5±0.1 0.6 0.1 0.8±0.1 0.2 0.8±0.1 Collector Mark 0.3 Schematic 0.8 1 Collector Note: All dimensions are in mm, tolerances are ±0.1mm unless otherwise specified. 2 Emitter Figure 4. PLCC-2 DETECTOR (ACTIVE) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice.
PAGE 5
2.2 ± 0.5 ø178.0 ± 1.0 ø60.0 ± 0.5 ø13.0 ± 0.5 3,000 units per reel 9.0 ± 0.5 12.0 ± 0.15 Progressive direction 2.0 ± 0.05 4.0 1.50 +0.10 –0.0 0.25 1.75 +0.3 2 8.0 –0.1 1.83 3.5 ± 0.05 1 4.0 0.90 2 1 Emitter 0.83 Collector Note: Tolerances are ±0.1mm unless otherwise stated. All dimensions in mm. © 2007 Fairchild Semiconductor Corporation KDT00030 / KDT00030A Rev. 1.1.0 www.fairchildsemi.
PAGE 6
TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.