Datasheet

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSA2258 • Rev. 1.0.5 3
FSA2258 — Low-Voltage, Dual-SPDT (0.8

) Analog Switch with 16kV ESD
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol Parameter Min. Max. Units
V
CC
Supply Voltage -0.5 5.5 V
V
SW
Switch I/O Voltage
(1)
1B0, 1B1, 2B0, 2B1,
1A, 2A Pins
-0.5 V
CC
+ 0.3 V
V
IN
Control Input Voltage
(1)
S1, S2 -0.5 5.5 V
I
IK
Input Clamp Diode Current -50 mA
I
SW
Switch I/O Current (Continuous) 350
mA
I
SWPEAK
Peak Switch Current (Pulsed at 1ms Duration, <10% Duty Cycle) 500
mA
T
STG
Storage Temperature Range -65 +150 °C
T
J
Maximum Junction Temperature +150 °C
T
L
Lead Temperature (Soldering, 10 seconds) +260 °C
ESD
Human Body Model, JEDEC: JESD22-A114
I/O to GND 9
kV
Power to GND 16
All Other Pins 9
Charged Device Model, JEDEC: JESD22-C101
2
Note
1. Input and output negative ratings may be exceeded if input and output diode current ratings are observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol Parameter Min. Max. Units
V
CC
Supply Voltage 1.65 4.30 V
V
IN
Control Input Voltage 0 V
CC
V
V
SW
Switch I/O Voltage 0 V
CC
V
T
A
Operating Temperature -40 +85 °C