Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsPMICsPMIC - ELCs High side UFBGA 6

August 2012

FPF1003A / FPF1004 • Rev. 1.0.6

FPF1003A / FPF1004 — IntelliMAX™ Advanced Load Management Products

FPF1003A / FPF1004

IntelliMAX™ Advanced Load Management Products

Features



1.2 V to 5.5 V Input Voltage Operating Range

 Typical R

DS(ON)

- 30 mΩ at V

=5.5 V

- 35 mΩ at V

=3.3 V

 ESD Protected: Above 8000 V HBM

 ROHS Compliant

Applications

 PDA’s

 Cell Phones

 GPS Devices

 MP3 Players

 Digital Cameras

 Peripheral Ports

 Hot Swap Supplies

Description

The FPF1003A and FPF1004 are low R

P-channel

MOSFET load switches with controlled turn-on. The

input voltage range operates from 1.2 V to 5.5 V to fulfill

today's ultra-portable device supply requirements.

Switch control is accomplished with a logic input (ON)

capable of interfacing directly with low-voltage control

signal. In FPF1004, a 120 Ω on-chip load resistor is

added for output quick discharge when the switch is

turned off.

Both FPF1003A and FPF1004 are available in a space-

saving 1.0x1.5 mm

wafer-level chip-scale package.

Ordering Information

Part Number

Top Mark Switch

Input

Buffer

Output

Discharge

ON Pin

Activity

Package

FPF1003A Q2

30 mΩ,

PMOS

Schmitt

Active

HIGH

1.0 x 1.5 mm

Wafer-Level

Chip-Scale Package (WLCSP),

FPF1004 Q3 120Ω

Active

HIGH

Summary of content (11 pages)

PAGE 1
FPF1003A / FPF1004 IntelliMAX™ Advanced Load Management Products Features Description   The FPF1003A and FPF1004 are low RDS P-channel MOSFET load switches with controlled turn-on. The input voltage range operates from 1.2 V to 5.5 V to fulfill today's ultra-portable device supply requirements. Switch control is accomplished with a logic input (ON) capable of interfacing directly with low-voltage control signal.
PAGE 2
VIN OFF ON ON VOUT To Load GND Figure 1. Typical Application Block Diagram Figure 2. Functional Block Diagram © 2007 Fairchild Semiconductor Corporation FPF1003A / FPF1004 • Rev. 1.0.6 www.fairchildsemi.
PAGE 3
Figure 3. WLCSP Bumps Facing UP Figure 4. WLCSP Bumps Facing Down Figure 5. 1.0mm x 1.5mm WLCSP Pin Assignments (Bottom View) Pin Definitions Pin # Name Description A2, B2 VIN Input to the power switch and the supply voltage for the IC C2 ON ON Control Input A1, B1 VOUT Output of the power switch C1 GND Ground © 2007 Fairchild Semiconductor Corporation FPF1003A / FPF1004 • Rev. 1.0.6 www.fairchildsemi.
PAGE 4
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit -0.3 6.0 V VIN VIN, VOUT, ON to GND ISW Maximum Continuous Switch Current 2.
PAGE 5
Unless otherwise noted, VIN=1.2 to 5.0V, TA=-40 to +85°C; typical values are at VIN=3.3V and TA=25°C. Symbol Parameter Conditions Min. Typ. Max. Units 5.5 V VON=GND, OUT=Open 1 μA VON=GND, VOUT=0 at VIN=5.5, TA=85°C 1 μA 100 nA 1 μA Basic Operation VIN IQ(OFF) Supply Voltage Off Supply Current ISD Shutdown Current IQ Quiescent Current RON On-Resistance 1.2 VON=GND, VOUT=0 at VIN=3.3, TA=85°C 10 IOUT=0 mA, VIN=VON VIN=5.5 V, IOUT=1 A, TA=25°C 20 30 VIN=3.
PAGE 6
Typical Performance Characteristics Figure 6. Quiescent Current vs. VIN Figure 7. ON Threshold vs. VIN Figure 8. Quiescent Current vs. Temperature Figure 9. Quiescent Current (OFF) vs. Temperature Figure 10. ISWITCH-OFF Current vs. Temperature Figure 11. ISWITCH-OFF Current vs. VIN © 2007 Fairchild Semiconductor Corporation FPF1003A / FPF1004 • Rev. 1.0.6 www.fairchildsemi.
PAGE 7
Figure 12. RON vs. VIN Figure 13. RON vs. Temperature Figure 14. tON/tOFF vs. Temperature Figure 15. tR/tF vs. Temperature Figure 16. FPF1003A tON Response Figure 17. FPF1003A tOFF Response © 2007 Fairchild Semiconductor Corporation FPF1003A / FPF1004 • Rev. 1.0.6 FPF1003A / FPF1004 — IntelliMAX™ Advanced Load Management Products Typical Performance Characteristics www.fairchildsemi.
PAGE 8
Figure 18. FPF1003A tON Response Figure 19. FPF1003A tOFF Response Figure 20. FPF1004 tON Response Figure 21. FPF1004 tOFF Response Figure 22. FPF1004 tON Response Figure 23. FPF1004 tOFF Response © 2007 Fairchild Semiconductor Corporation FPF1003A / FPF1004 • Rev. 1.0.6 FPF1003A / FPF1004 — IntelliMAX™ Advanced Load Management Products Typical Performance Characteristics www.fairchildsemi.
PAGE 9
1.2 to 5.5 V. Switch control is accomplished with a logic input (ON) capable of interfacing directly with lowvoltage control signal. In FPF1004, a 120 Ω on-chip load resistor is added for output quick discharge when the switch is turned off. Input Capacitor FPF1003A and FPF1004 are low-RDS(ON) P-channel load switches with controlled turn-on. The core of each device is a 30 mΩ P-Channel MOSFET and a controller capable of functioning over an input operating range of Application Information Figure 24.
PAGE 10
0.03 C E 2X F A (Ø0.350) SOLDER MASK OPENING B (Ø0.250) Cu Pad A1 (1.00) BALL A1 INDEX AREA D (0.50) 0.03 C 2X TOP VIEW RECOMMENDED LAND PATTERN (NSMD PAD TYPE) 0.06 C 0.625 0.539 0.05 C C 0.332±0.018 0.250±0.025 E SEATING PLANE D SIDE VIEWS NOTES: A. NO JEDEC REGISTRATION APPLIES. 0.005 Ø0.315 +/- .025 6X 0.50 C 1.00 B A 0.50 (Y) ±0.018 1 2 F (X) ±0.018 BOTTOM VIEW C A B B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCE PER ASMEY14.5M, 1994. D.
PAGE 11
FPF1003A / FPF1004 — IntelliMAX™ Advanced Load Management Products © 2007 Fairchild Semiconductor Corporation FPF1003A / FPF1004 • Rev. 1.0.6 www.fairchildsemi.