Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsBJTs & IGBTsTransistor

FFB2907A / FMB2907A / MMPQ2907A — PNP Multi-Chip General-Purpose Amplifier

FFB2907A / FMB2907A / MMPQ2907A Rev. 1.1.0 1

January 2014

FFB2907A / FMB2907A / MMPQ2907A

PNP Multi-Chip General-Purpose Amplifier

Block Diagram

Figure 1. FFB2907A Device Package Figure 2. FFB2907A Internal Connections

Figure 3. FMB2907A Device Package Figure 4. FMB2907A Internal Connections

Figure 5. MMPQ2907A Device Package Figure 6. MMPQ2907A Internal Connections

SC70-6

Mark: .2F

pin #1

SuperSOT

™

-6

Mark: .2F

Dot denotes pin #1

pin #1

SOIC-16

Mark:

MMPQ2907A

pin #1

B4E4B3E3B2E2B2E1

C4C4C3C3C2C2C1C1

Description

This device is designed for use as a general-purpose

amplifier and switch for collector currents to 500 mA.

Sourced from Process 63.

Summary of content (10 pages)

PAGE 1
FFB2907A / FMB2907A / MMPQ2907A PNP Multi-Chip General-Purpose Amplifier Description This device is designed for use as a general-purpose amplifier and switch for collector currents to 500 mA. Sourced from Process 63. Block Diagram E2 E2 C2 B2 B1 C1 E1 B2 C1 C2 SC70-6 Mark: .2F E1 pin #1 B1 Figure 1. FFB2907A Device Package Figure 2. FFB2907A Internal Connections C2 E1 C2 B2 E1 E2 C1 B1 C1 B2 E2 pin #1 B1 SuperSOT™-6 Mark: .2F Dot denotes pin #1 Figure 3.
PAGE 2
Part Number Top Mark Package Packing Method FFB2907A .2F SC70 6L Tape and Reel FMB2907A .2F SSOT 6L Tape and Reel MMPQ2907A MMPQ2907A SOIC 16L Tape and Reel Absolute Maximum Ratings(1),(2) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
PAGE 3
Values are at TA = 25°C unless otherwise noted. Symbol V(BR)CEO Parameter Collector-Emitter Breakdown Voltage(4) Conditions Min. Typ. Max. Unit IC = -10 mA, IB = 0 -60 V IC = -10 μA, IE = 0 -60 V Emitter-Base Breakdown Voltage IE = -10 μA, IC = 0 -5.0 Base Cut-Off Current VCE = -30 V, VEB = -0.5 V -50 nA ICEX Collector Cut-Off Current VCE = -30 V, VEB = -0.
PAGE 4
VCESAT - COLLECTOR EMITTE R VOLTAGE (V) h FE - TYPICAL PULSED CURRENT GAIN 0.5 500 VCE = 5V 400 125 °C 0.3 300 200 100 0 0.1 25 °C 0.1 - 40 °C 0.3 1 3 10 30 100 I C - COLLECTOR CURRENT (mA) 300 - 40 °C 0 V BE( ON)- BAS E EMITTER ON VOLTAGE (V) V BESAT - BASE EMITTER VOLTAGE (V) - 40 °C 1 25 °C 0.6 10 100 I C - COLLECTOR CURRE NT (mA) 0.6 125 °C 0.4 β = 10 - 40 °C 25 °C 125 °C VCE = 5V 0.2 0.2 1 10 100 I C - COLLECTOR CURRENT (mA) 500 1 0.8 0.8 500 0 0.
PAGE 5
250 I B1 = I B2 = 200 500 Ic I B1 = I B2 = 10 400 V cc = 15 V ts 150 TIME (nS) TIME (nS) V cc = 15 V 100 tr tf 300 200 t off 50 100 t on td 0 10 100 I C - COLLECTOR CURRENT (mA) 0 10 1000 PD - POWE R DIS SIPATION (W) I B1 - TURN 0N BASE CURRENT (mA) 50 20 t r = 15 V 5 30 ns 2 60 ns 1 10 100 I C - COLLECTOR CURRENT (mA) 1000 1 SOIC-16 SOT-6 0.75 0.5 SC70 -6 0.25 0 500 0 25 50 75 100 TE MPE RATURE (°C) 125 150 Figure 16. Power Dissipation vs.
PAGE 6
CHAR. RELATIVE TO VALUES AT VCE = -10V CHAR. RELATIVE TO VALUES AT I C= -10mA 5 h oe h re 2 h fe 1 h ie 0.5 VCE = -10 V T A = 25 oC 0.2 0.1_ _ 1 _ _ _ 2 5 10 20 I C - COLLECTOR CURRENT (mA) _ 50 1.2 h re and hoe h re h ie h fe hoe 1.1 1 h ie 0.9 h fe 0.8 -4 I C = -10mA T A = 25oC -8 -12 -16 V CE - COLLECTOR VOLTAGE (V) -20 Figure 18. Common Emitter Characteristics Figure 17. Common Emitter Characteristics CHAR. RELATIVE TO VALUES AT TA = 25oC 1.3 1.5 I C = -10mA 1.4 V = -10 V CE 1.
PAGE 7
FFB2907A / FMB2907A / MMPQ2907A — PNP Multi-Chip General-Purpose Amplifier Physical Dimensions SC70 6L SYMM C L 2.00±0.20 0.65 A 0.50 MIN 6 4 B PIN ONE 1.25±0.10 1 1.90 3 0.30 0.15 (0.25) 0.40 MIN 0.10 0.65 A B 1.30 LAND PATTERN RECOMMENDATION 1.30 1.00 0.80 SEE DETAIL A 1.10 0.80 0.10 C 0.10 0.00 C 2.10±0.30 SEATING PLANE NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE (R0.10) 0.25 0.10 0.20 A) THIS PACKAGE CONFORMS TO EIAJ SC-88, 1996. B) ALL DIMENSIONS ARE IN MILLIMETERS.
PAGE 8
FFB2907A / FMB2907A / MMPQ2907A — PNP Multi-Chip General-Purpose Amplifier Physical Dimensions (Continued) SSOT 6L Figure 21. 6-LEAD, SUPERSOT-6, JEDEC MO-193, 1.6 MM WIDE (ACTIVE) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 9
FFB2907A / FMB2907A / MMPQ2907A — PNP Multi-Chip General-Purpose Amplifier Physical Dimensions (Continued) SO 16L NB 10.00 9.80 A 8.89 16 9 B 4.00 3.80 6.00 PIN ONE INDICATOR 1.75 1 5.6 8 0.51 0.35 1.27 (0.30) 0.25 M 1.27 C B A 0.65 LAND PATTERN RECOMMENDATION 1.75 MAX 1.50 1.25 SEE DETAIL A 0.25 0.10 C 0.25 0.19 0.10 C 0.50 0.25 X 45° NOTES: UNLESS OTHERWISE SPECIFIED (R0.10) GAGE PLANE A) THIS PACKAGE CONFORMS TO JEDEC MS-012, VARIATION AC, ISSUE C.
PAGE 10
TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.