Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsLogic ICsLogic IC - Latch Transparent D latch Three-state TSSOP 20

74LCX373 — Low Voltage Octal Transparent Latch with 5V Tolerant Inputs and Outputs

74LCX373 Rev. 1.8.1

74LCX373

with 5V Tolerant Inputs and Outputs

Features

■

5V tolerant inputs and outputs

■

2.3V–3.6V V

specifications provided

■

8.0ns t

max. (V

= 3.3V), 10µA I

max.

■

Power down high impedance inputs and outputs

■

Supports live insertion/withdrawal

(1)

■

±24mA output drive (V

= 3.0V)

■

Latch-up performance exceeds JEDEC 78 conditions

■

ESD performance

– Human body model

2000V

– Machine model

200V

■

Leadless DQFN package

Note:

1. To ensure the high impedance state during power up

or down, OE should be tied to V

through a pull-up

resistor: the minimum value of the resistor is

determined by the current-sourcing capability of the

driver.

General Description

The LCX373 consists of eight latches with 3-STATE

outputs for bus organized system applications. The

device is designed for low voltage applications with

capability of interfacing to a 5V signal environment.

The LCX373 is fabricated with an advanced CMOS

technology to achieve high speed operation while main-

taining CMOS low power dissipation.

Ordering Information

Note:

2. DQFN package available in Tape and Reel only.

Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number.

All packages are lead free per JEDEC: J-STD-020B standard.

Order

Number

Package

Number Package Description

74LCX373WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide

74LCX373SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide

74LCX373BQX

(2)

MLP20B 20-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC

MO-241, 2.5 x 4.5mm

74LCX373MSA MSA20 20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide

74LCX373MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm

Wide

Implements p

roprietary

noise/EMI reduction circuitry

Low Voltage Octal Transparent Latch

December 2013

Summary of content (15 pages)

PAGE 1
74LCX373 Low Voltage Octal Transparent Latch with 5V Tolerant Inputs and Outputs Features General Description ■ 5V tolerant inputs and outputs The LCX373 consists of eight latches with 3-STATE outputs for bus organized system applications. The device is designed for low voltage applications with capability of interfacing to a 5V signal environment. ■ 2.3V–3.6V VCC specifications provided ■ 8.0ns tPD max. (VCC = 3.3V), 10µA ICC max.
PAGE 2
Logic Symbols Pin Assignments for SOIC, SOP, SSOP, TSSOP OE O0 D0 D1 O1 O2 D2 D3 O3 GND 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 D0 D1 D2 D3 D4 D5 D6 D7 LE VCC O7 D7 D6 O6 O5 D5 D4 O4 LE OE O0 O1 O2 O3 O4 O5 O6 O7 IEEE/IEC Pad Assignments for DQFN OE VCC 1 20 OE LE EN C1 D0 D1 D2 D3 D4 D5 D6 D7 1D O0 O1 O2 O3 O4 O5 O6 O7 O0 2 19 O7 D0 3 18 D7 D1 4 17 D6 O1 5 16 O6 O2 6 15 O5 LE OE Dn On D2 7 14 D5 X H X Z D3 8 13 D4 H L L L O3 9 12
PAGE 3
D0 D1 D D2 D G O D3 D G O D4 D G O D5 D G O D6 D G O D7 D G O D G O G O LE OE O0 O1 O2 O3 O4 O5 O6 O7 Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. ©2006 Fairchild Semiconductor Corporation 74LCX373 Rev. 1.8.1 www.fairchildsemi.
PAGE 4
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Value Units Supply Voltage –0.5 to +7.0 V VI DC Input Voltage –0.5 to +7.0 V VO DC Output Voltage –0.
PAGE 5
TA = –40°C to +85°C Symbol Parameter VIH HIGH Level Input Voltage VIL LOW Level Input Voltage VOH VOL II IOZ HIGH Level Output Voltage LOW Level Output Voltage Min. Conditions 2.3–2.7 1.7 2.7–3.6 2.0 Max. V 2.3–2.7 0.7 2.7–3.6 0.8 2.3–3.6 IOH = –100µA V VCC – 0.2 2.3 IOH = –8mA 1.8 2.7 IOH = –12mA 2.2 3.0 IOH = –18mA 2.4 3.0 IOH = –24mA 2.2 2.3–3.6 Units V IOL = 100µA 0.2 2.3 IOL = 8mA 0.6 2.7 IOL = 12mA 0.4 3.0 IOL = 16mA 0.4 V 3.0 IOL = 24mA 0.
PAGE 6
TA = 25°C Symbol VOLP VOLV Parameter Quiet Output Dynamic Peak VOL Quiet Output Dynamic Valley VOL VCC (V) Conditions Typical Units V 3.3 CL = 50pF, VIH = 3.3V, VIL = 0V 0.8 2.5 CL = 30pF, VI = 2.5V, VIL = 0V 0.6 3.3 CL = 50pF, VIH = 3.3V, VIL = 0V –0.8 2.5 CL = 30pF, VI = 2.5V, VIL = 0V –0.6 V Capacitance Symbol CIN Parameter Conditions Typical Units Input Capacitance VCC = Open, VI = 0V or VCC 7 pF COUT Output Capacitance VCC = 3.
PAGE 7
VCC OPEN 500Ω TEST SIGNAL tPLH, tPHL tPZH, tPHZ tPZL, tPLZ GND DUT VI CL 500Ω Figure 1. AC Test Circuit (CL includes probe and jig capacitance) Test DATA IN Switch tPLH, tPHL Open tPZL, tPLZ 6V at VCC = 3.3 ± 0.3V VCC x 2 at VCC = 2.5 ± 0.
PAGE 8
Input Stage P2 P1 VCC Data ESD P5 D2 N+/P– X1 VDD N1 N2 GTO™ Output Input Stage D6 N+/P– P4 P3 N5 Enable N4 ESD D4 N+/P– N3 ©2006 Fairchild Semiconductor Corporation 74LCX373 Rev. 1.8.1 www.fairchildsemi.
PAGE 9
Tape Format for DQFN Package Designator BQX Tape Section Number Cavities Cavity Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Dimensions inches (millimeters) Reel Dimensions inches (millimeters) Tape Size A B 12mm 13.0 (330.0) 0.059 (1.50) ©2006 Fairchild Semiconductor Corporation 74LCX373 Rev. 1.8.1 C D N W1 0.512 (13.00) 0.795 (20.20) 2.165 (55.00) 0.488 (12.4) W2 0.724 (18.4) www.
PAGE 10
13.00 12.60 A 11.43 20 11 B 9.50 10.65 7.60 10.00 7.40 2.25 1 10 0.51 0.35 PIN ONE INDICATOR 0.25 M 0.65 1.27 1.27 C B A LAND PATTERN RECOMMENDATION 2.65 MAX SEE DETAIL A 0.33 0.20 C 0.75 0.25 X 45° SEATING PLANE NOTES: UNLESS OTHERWISE SPECIFIED (R0.10) GAGE PLANE (R0.10) 0.10 C 0.30 0.10 0.25 8° 0° A) THIS PACKAGE CONFORMS TO JEDEC MS-013, VARIATION AC, ISSUE E B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS. D) CONFORMS TO ASME Y14.
PAGE 11
74LCX373 — Low Voltage Octal Transparent Latch with 5V Tolerant Inputs and Outputs Physical Dimensions (Continued) Figure 4. 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 12
74LCX373 — Low Voltage Octal Transparent Latch with 5V Tolerant Inputs and Outputs Physical Dimensions (Continued) Figure 5. 20-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 4.5mm Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 13
74LCX373 — Low Voltage Octal Transparent Latch with 5V Tolerant Inputs and Outputs Physical Dimensions (Continued) Figure 6. 20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 14
74LCX373 — Low Voltage Octal Transparent Latch with 5V Tolerant Inputs and Outputs Physical Dimensions (Continued) Figure 7. 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 15
TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.