Programmers Manuals

Section 5: Operations
6/08 81 51195 Rev. 1
SYSTEM SHUTDOWN PROCEDURE
1. Press the red EXIT button.
2. Click YES on the Verification to Close window.
3. Close the DataBank Program by pressing the red EXIT button.
4. Click YES on the Verification to Close window.
5. Close the Kernel Program by pressing the red EXIT button.
6. Click YES on the Verification to Close window.
7. Press the Start button, then select Shut
Down.
8. Press the
Turn Off button.
─ The instrument turns off.
─ Upon shut down, the display turns
dark.
9. Turn off the power using the ON/OFF
rocker switch.
The FB3000 will close down properly.
CAUTION
Improper shutdown of this instrument can cause
damage to the hard drive and loss of data.