Operators Manual User guide

04/12 52 51146 Rev. 3
Appendix III: Data Output
REMOTE DISPLAY OUTPUT
Remote Display Data Format
<STX><4><0><SP/-><XXXXXX><ETX>
Note(s):
1. Characters denoted by X are characters 0-9.
2. Leading zeroes are suppressed.
3. Polarity indication for a positive value is a space ( SP ).
−
−−
− Negative values are not transmitted.
4. Identifier code <4><0> = Gross weight .
−
−−
− Transmission is Gross Only.
5. Transmission for the DEMAND Mode occurs when a carriage return (CR) Hex
0D is received.
CONFIGURE OUTPUT
Fairbanks Data Format
<STX><A><B><C><GGGGGG><TTTTTT><CR>
Note(s):
1. Characters denoted by G and T are characters 0-9.
2. Leading zeroes are suppressed.
3. Gross Weight Data = G
Tare Weight Data = T
Status Code (Word) A
Bit # X00 X0 X X.X X.XX X.XXX X.XXXX X.XXXXX
0
0 1 0 1 0 1 0 1
1
0 0 1 1 0 0 1 1
2
0 0 0 0 1 1 1 1