Operators Manual User guide

04/12 38 51146 Rev. 3
Section 5: Operation
5.1. SYSTEM BOOT-UP PROCEDURE
Initiate the power up sequence using the power ON/OFF rocker switch located on
the bottom-left side of the instrument.
Normal indications include the following:
─ Lights on the keyboard should blink.
─ After approximately one minute, the Fairbanks Logo appears along
with a mouse pointer, located approximately in the center of the screen.
─ The Fairbanks Logo disappears.
─ A Windows welcome screen appears.
─ Lastly, a weighing application window appears.