Operators Manual User guide

Section 4: Input/ Output (I/O)
04/12 26 51147 Rev. 3
4.2.9. Other Data String Customization, Continued
Window Name Description
CONFIGURE OUTPUT,
CONTINUED
─ [Port] Settings
Tab
Control Signals
─ DSR (Data Set Ready) – A control signal that indicates the
device is ready to transmit data.
─ CTS (Clear To Send) – A control signal used to notify the
device that it has line control.
─ Load Tab
Selects a preconfigured data protocol based on the scale manufacturer
selected.
─ Select this item first when configuring an output.
─ Press the OK button to load the data protocol selected.
DEFAULT DATA PROTOCOLS
Fairbanks <STX><A><B><C><GGGGGG><TTTTTT><CR>
Toledo <STX><A><B><C><GGGGGG><TTTTTT><CR>
Cardinal <CR><P><WWWWWW><m><SP><U><SP><g><SP><SP><ETX>
Weightronix < ><M><WWWWWW>< ><U><CR><LF>
Condec <STX><P><WWWWWWW><U><G><M><CR>
** See Appendix III for more formatting information.