Owner's manual

Section 3: Access Terminal Screens Defined
01/13 86 51299 Rev. 1
3.3.2. Configurations For PDQ Io Node, continued
c. Insert factory default IP of 192.168.1.7
d. Click Submit to save changes.
e. Locate and click on the Setup link.
f. Click Ok to the unsaved changes dialogue box.
g. Verify connectivity by locating and clicking on Ping.
4. Set the IO node labels for both i/o.
a. To locate section go to Home >> Device Setup >> Input/ Output Setup.
5. Select the I/O device labeled “pdqIOnode” from the above tab region
*note the pdqIOnode tab reflects a custom entry to describe the PDQ IO node.
g