Owner's manual

Section 3: Access Terminal Screens Defined
01/13 85 51299 Rev. 1
3.3.2. Configurations For PDQ Io Node, continued
2. Verify network communications setup includes enabling of dual homing.
To locate section go to Home >> Device Setup >> Network Setup.
a. Insert subnet of 192.168.1.x where x is the last octet of the Titan FBAS IP
address.
b. Insert subnet mask of 255.255.252.0
c. Click Submit to save changes
3. Verify Input/output setup including the PDQ IO Node device.
To locate section go to Home >> Device Setup >> Input/ Output Setup.
a. Enable checkbox and select PDQ IO Node
b. Create a description ex. pdqIonode.
a
a
b
c
e