Owner's manual

Section 3: Access Terminal Screens Defined
01/13 74 51299 Rev. 1
3.3.1. Internal Devices
Internal Devices Setup permits programming for a card reader, printer, intercom,
audio, and keypad setup in the software.
Card Reader Setup: Uses TTL communication instead of a serial port.
Printer Setup- Default set to COM Port 2, can also use ports: 3 and 4 if
available.
Audio Setup
• Keypad Clicks: Turns on/off audio clicks for any pressed key on keypad
• Talking Keys: Turns on/off audio for any pressed number keys on keypad;
example: when 4 number key is pressed, a verbal audio annunciates four