Owner's manual

Section 3: Access Terminal Screens Defined
01/13 49 51299 Rev. 1
2
5
3
4
6
7
1
3.2.11. Traffic Control Setup
Traffic Control has two main purposes:
a) Ensure the vehicle is on the scale and that any optional conditions (i.e.
radiation detection) are met before a transaction is allowed to be started at the
terminal.
b) Control varioius traffic devices (e.g. signs, gates, lights) to properly control the
flow of traffic across the scale.
Sections of entire screen traffic control setup are displayed below. The next set of
pages describes the purpose behind each option.