Manual

Section 2: General Policies
10/13 9 51287 Rev. 2
2.1.1. Unpacking
Follow these guidelines when unpacking all equipment:
Check in all components and accessories according to the customer's order.
Remove all components from their packing material, checking against the invoice
that they are accounted for and not damaged.
Advise the shipper immediately, if damage has occurred.
Order any parts necessary to replace those which have been damaged.
Keep the shipping container and packing material for future use.
Check the packing list.
Collect all necessary installation manuals for the equipment and
accessories.
Open the equipment and perform an inspection, making certain
that all hardware, electrical connections, and printed circuit
assemblies are secure.
Do not reinstall the cover if the final installation is to be
performed after the pre-installation checkout.
2.1.2. Equipment Location
Position the equipment with these points in mind:
Intense direct sunlight can harm the display.
Work areas should be relatively free from drafts and
vibrations.
Do not locate near magnetic material or equipment/instruments which use
magnets in their design.
Avoid areas which have extreme variations in room temperatures. Temperatures
outside the instrument’s specifications will affect the weighing accuracy of this
product.