Owner's manual

01/12 48 50647 Rev. 9
Section 4: Security
4.1. SECURITY CODES
Follow these steps to create or change a
UCodE.
Follow the standard exiting procedures as noted in the Menu Navigation section
of this manual.
PROMPT CHOICE(S)
UCodE
User Code
 Provides access for the operator /supervisor to the user programmable options.
USE CAUTION when making changes to the system.
DISPLAYED PROMPTS REQUIRED ACTIONS
 UCodE
 1. Press the
PRINT key.
 P
 2. Press the UNITS key.
 PU
 3. Press the
Pgr key.
 PUC
 4. Press the ID key.
 PUCi
 5. Press the hidden key (between) ID and TARE.
 PUCin
 6. Press the ID key.
 PUCini
 7. Press the
ENTER key.
 noSEAL
 8. Use the SCROLL key to choose either noSEAL.
 (noncommercial) or SEAL (commercial) set, depending on
the
 local jurisdiction.
 9. Press the ENTER key.
 nUPASS
 10. Using the numeric keypad, enter the new user code.
 11. Press the
ENTER key.
 CLrFin
 12. Use the SCROLL key to choose either CLrFin
(password
 needed upon menu re-entry) and CLrPon (password
needed
 after power-up).
 XX.XX.XX
 13. Current date. If correct, proceed by pressing the
ENTER
 key, or enter correct date using the numeric keypad.