Owner's manual

Section 3: Programming
01/12 46 50647 Rev. 9
3.5.1. I/O MENU DESCRIPTIONS, CONTINUED
PROMPT CHOICE(S)
SPAUto
A Batching mode, allowing the operator to press the START key once to
add multiple materials automatically
─ It allows SoLo (single setpoint-relay) or PAIRED (dual setpoint-
relays) setpoint(s).
─ In the SoLo mode. Targets 1 thru X represent the required
weight of each individual material.
─ In the PAIRED mode, Targets 1 thru 4 represent the Bulk or
Fast-Fill Relays
─ Targets 5 through 8 are the slow or target.
─ Note the association of paired setpoints-relay:
 1-5  2-6  3-7  4-8
Always program the Bulk-Fast Fill Setpoint-Relays to a lesser weight
value than the complete material weight value
─ Configure the Target-Slow Fill Setpoint-Relays assigned to the
complete material weight value.
─ When using multiple materials, set the SdELAY (timer for start of
next material relays) in the IO Menu.
─ If a printer has been selected, an auto print occurs when target
value is reached.
─ SPAUto is not available in the gallons mode.
SPAUto EXAMPLE
Below is an example of a simple, two (2) material batch with PAIRED
relays.
FUNCTION TARGET NUMBER
─ Material 1 bulk - fast fill
relay (1)
─ 1
─ Material 2 bulk - fast fill
relay (2
─ 2
─ Not used ─ 3
─ Not used ─ 4
─ Material 1 target - slow fill
relay (5)
─ 5
─ Material 2 target - slow fill
relay (6)
─ 6
─