Owner's manual

Section 3: Programming
01/12 38 50647 Rev. 9
3.5.1. I/O MENU DESCRIPTIONS, CONTINUED
10. Press ENTER again.
─ The current gallon per weight displays.
11. Clear the display by pressing the numeric ZERO key until it is blank.
12. Key in the correct number of gallons.
13. Press
ENTER.
─ The amount of gallons displays.
14. Press the UNITS key to toggle from weight to Gallons and confirm the correct
weight to gallons ratio.
NOTE: The Tare Mode is unavailable in Gallon Conversion Mode.
MENU ITEM DESCRIPTION
0ShiFt
Sets the Capacity Percentage of the Positive Weight Shift on the scale.
─ Zeros the scale before an error code (i.e. lc error) displays in the small
window display.
─ Press the
ZERO key a second time zeros the scale and continues its
weighing.
tArEoP
Tare options include AUto (Using the
AUTOTARE key).
tA Ent
Using the numeric keypad, enter a known Tare Weight.
P hoLd
Peak Weight options are Hold and No-Hold.
─ If enabled, this holds the highest recorded NET Weight Reading.
─ Not used while in the Setpoint mode.
FodiSt
If a Device Output is selected, there are two fiber optic distance options.
─ 0-99 ft. = Short
─ 100+ ft. = Long
PrtLoC
Formats all available printer locations, if a ticket printer is selected in either port.
The following prompts apply when formatting the printer.