Owner's manual

Section 3: Programming
01/12 36 50647 Rev. 9
3.5.1. I/O MENU DESCRIPTIONS
The IO (Input/Output) Menu sets up communications for sending data to devices,
such as computers, printers, or remote displays. It also contains a menu for setting
the time & date.
Steps for Setting the Date
1. With dAtE displayed, press the ENTER key.
─ The present date in memory displays with a small legend date flashing .
2. Using the numeric keypad, enter the current date.
─ Use the MM/DD/YY (month/day/year) format.
3. Press ENTER.
─ Once complete, the display returns to the dAtE.
Steps for Setting the Time
─ With hoUr displayed, press the ENTER key.
─ The present time in memory displays with a small legend time flashing.
─ Using the numeric keypad, enter the current date.
─ Use the HH/MM/SS (hour/minute/second) format.
─ When entering the time of 08:35am for example, press the numeric keys
0, 8,
3,
5, followed by the AUTOTARE key.
─ The time 08:35A.
─ The AUTOTARE key is used to enter an A for AM.
─ The
PRINT key is used to enter P for PM.
─ For military time (24 hour format), enter the current time using the numeric
keypad and press the ENTER key.
MENU ITEM DESCRIPTION
Port b
Programs Setpoint modes, remote displays, printer, and computer outputs.
dAtE
Adjusts the date.
MENU ITEM DESCRIPTION
hoUr
Adjusts the time.