Owner's manual

Section 3: Programming
01/12 34 50647 Rev. 9
3.4. MAIN MENU DESCRIPTIONS
MENU ITEM DESCRIPTION
CoUntS
 Formatted CELL X, where x represents the load cell currently being
displayed, the load cells are selectable using the SCROLL key.
 The small display shows two numeric values.
─ The first value is the Initial Deadload or Zero Counts.
─ The second is the Current Liveload Count(s).
dEg C
 Formatted XX.X°C.
 Displays the current internal temperature of the instrument in Centigrade.
bAtt
 Displays XX.XdC.
 The current battery voltage.
U AUdt
User Audit.
S AUdt
Service Audit.
C Audt
Calibration Audit.
dAtE
 Displays MM.DD.YY.
 The current system date.
hoUr
 Displays HH.MM.SS.
 The current system time.
 For viewing purposes only.
 Refer to the IO Section for programming.
C SEnS
 mV/V of cell(s) currently selected.
 All cells may be viewed using the SCROLL key.
rEPort
hrdCPY
 For printing a configuration report to an installed printer.
 A conditional statement appearing only when a printer is installed on IO Ports
A or B.