Owner's manual

Section 2: Operation
01/12 29 50647 Rev. 9
─ At any time, the current Peak Net Weight can be viewed by pressing the
START/PEAK key.
─ Press the ENTER key to return the Weighing mode.
6. If a printer is enabled, pressing the PRINT key will have the Peak Net Weight
transmitted with the printed data.
─ A print command ends the “Peak hoLd” Weighing Cycle.
7. Press the STOP/CLEAR key to reset the current Peak Weight, and press the
START/PEAK key followed by the ENTER key to enable the feature.