User guide

03/10 25 50614 Rev. 5

Side View

1 1/2" Min

LEVEL

Load

Cell

50614_26

12: Plumb the load cells by lifting the weighbridge up slightly and shifting the load cell base

plate on the grout plate. Use a machinists level to align and ensure a plumb and level condi-

tion.

13: When loadcell is plumb and level, tighten the lower receiver plate bolts to their final

torque value. Repeat for all loadcells in the scale.

SCALES MUST BE ON THE SAME PLANE

SCALES MUST BE LEVEL AND EVEN WITH EACH OTHER

REFERENCE LINE

Baseplate Leveling Screws

50614_27

14: When the weighbridge is completely set on plumb load cells, ensure ALL modules are on

the same plane. If necessary, loosen the grout plate pier bolts and adjust the three (3) level-

ing screws in each grout plate. When complete, re-tighten the grout plate anchor bolts tight

enough to ensure they do not shift.