Manual

04/12 54 50538 Rev. 7
Appendix I: Recommended Tools & Equipment:
QTY DESCRIPTION
2 EA MASON LINE
1 EA 25 FOOT TAPE MEASURE
1 EA 100 FOOT TAPE MEASURE
1 EA TRANSIT
1 EA PRECISION LEVEL (Starrette Model 98 Mechanics Level, 6 inch long model)
1 EA. TORQUE WRENCH OF SUITABLE CAPACITY
1 EA THREAD FILE; STANDARD THREAD SIZES OF 10, 8, 7, 6.
1 EA ELECTRIC DRILL / VARIABLE / 1/2" CHUCK SIZE
1 EA 1 1/4" & 1 1/2" WOOD DRILL BIT
1 EA WOOD HAND SAW
1 EA CARPENTERS CLAW HAMMER
4 EA 5 GALLON BUCKETS, WITH HANDLE
2 EA LARGE & SMALL TROWEL S
2 EA 1 1/4" STRUCTURAL WRENCH WITH OFFSET HEAD
(TO FIT 3/4-10 X 3 1/2" LONG A325 BOLTS)
1 EA 3/4" SOCKET SET
1 EA 1/2" OR 3/4" ELECTRIC IMPACT WRENCH
1 EA 1 1/4" HARDENED DEEP 6 POINT IMPACT SOCKETS
2 EA 24" ADJUSTABLE WRENCH (2 7/16" MAX. OPENING)
6 EA 6" HEAVY DUTY C-CLAMP, SUITABLE FOR WELDING
2 EA 8" HEAVY DUTY C-CLAMP, SUITABLE FOR WELDING
1 EA STEEL CARPENTERS SQUARE
1 EA HEAVY DUTY RIGHT ANGLE ELECTRIC GRINDER
WITH 7" DEPRESSED CENTER STONE.
1 EA AC/DC 200 AMP ARC WELDER / IF GASOLINE DRIVEN, INCLUDE A GAS
CAN. BOTH WIRE LEADS MUST BE LONG ENOUGH TO REACH EVERY
AREA OF THE SCALE
1 EA OXYGEN / ACETYLENE CUTTING TORCH SET
2 EA 36" CROW BAR / GOOSENECK BAR
2 EA 24" CROW BAR / GOOSENECK BAR
1 EA SHORT HANDLED 4 LB SLEDGE HAMMER
1 EA LONG HANDLED 5 LB SLEDGE HAMMER
1 EA ADJUSTABLE SQUARE
1 EA 2 FOOT LEVEL, GENERAL PURPOSE
2 EA 20 TON CAPACITY JACKS
1 EA HAND TRUCK
2 EA WIRE BRUSHES
1 EA 5 LB. GREASE
6 EA CANS OF SPRAY PAINT, COLOR = RED OXIDE PRIMER