User Manual

Section 3: Programming
02/13 23 51315 Rev. 1
3.3.1. SETTING AND PROGRAMMING TIME
4. At SEtUP, press the RIGHT ARROW key Set-ti displays, followed by the
current setting in HHMMSS.
5. Press the MENU key.
6. Key the new time setting with the 0-9 keys.
7. Press ENTER.
8. At the “12hr A” prompt, press the MENU key.
9. Use the ARROW KEYS to toggle through the option noted below.
• 12hr A – 12 hour clock, currently AM.
• 12hr P – 12 hour clock, currently PM.
• 24 hour – Military time (1:00 PM = 1300 hours).
10. Press ENTER to save the setting.
3.3.2. PROGRAMMING THE DATE
• Set-dA displays, followed by the current date setting.
• Date is entered in the MM-DD-YY format.
11. Press Menu.
– The first digit will blink.
12. Key the new date setting with the
0-9 keys.
13. When complete, the program will advance to Port 1.
14. Press the
INTERNAL PROGRAMMING SWITCH four (4) times slowly, and
the instrument will return to the Weigh Mode.