User Manual

Section 4: User Operations
08/12 33 51300 Rev. 1
4.7. MORE OPERATIONS
4.7.1. Accumulation
1. When there is a load on the scale weighing pan and piece weight has been
input.
2. Press .
– When the indicator beeps, lights up on the LCD, indicating a data
has been recorded.
3. Clear the load and put another load on the scale weighing pan. Set up the piece
weight again.
4. Press .
5. The indicator beeps, lights up, and the Indicating Second Data is
recorded.
Example:
1. Empty the scale weighing pan.
– The weight must be 0.
2. If the weight is not ZERO (0), use ZERO key to reset.
3. Press the + keys to set Piece Weight as 0.5 pounds.
4. Put 1 pound item on scale weighing pan and waiting for stable.
5. Press .
– When the indicator beeps, lights up.
6. Remove item on scale weighing pan.
– Make sure the weight is 0 again.
7. Press + keys to set Piece Weight as 0.1 pounds.
8. Put two pounds (2 lbs.) test weight on scale weighing pan.
– Allow the scale to be stable.
9. Press .
– After one beep sound, lights up.
Note: After each recording, if the load on the weighing pan is not cleared, pressing
will result in a long beep. The scale will not be able to record the next
weighing result.
 The stored memory can store up to one hundred eighty (180) accumulations.