User Manual

Section 4: User Operations
08/12 32 51300 Rev. 1
4.6.5. Modifying a PLU
1. When displays, press .
– The Piece Weight flashes.
2. Set up PIECE WEIGHT according to the previous section.
3. Press to save your settings.
EXAMPLE
1. Press key to access the third PLU.
2. Press key to access the PLU modify mode.
3. The Piece Weight flashes.
4. Press the keys.
– The Piece Weight is 0.5.
5. Press key to complete the PLU Modifying Process.
– The Tare Weight blinks.
6. Enter the new TARE WEIGHT.
7. Press key to save the Tare Weight.
– Scale will return to the Weigh Mode.