User Manual

Section 4: User Operations
08/12 31 51300 Rev. 1
4.6.3. Loading PLU 1 thru 9
1. In the Weight Mode, press any of the Direct PLU keys to access the PLU
memory of the key’s lower-right set.
2. In the case of pressing this PLU 3 key ( ), this function will load.
– The LCD shows 3 below the indicator.
NOTE: If there is no data input in thirty (30) seconds, scale exits the PLU Setting
Mode and returns to Weight Mode.
4.6.4. Loading PLU 0 thru 999
1. While in the Weight Mode, press and hold until it beeps twice, then release
it.
2. Use the numeric keys to input the PLU number
3. Press .
EXAMPLE
1. Press and hold until it beeps twice, then release it.
– PLU indicator displays 000.
– flashes on the display.
2. Press key.
– PLU indicator displays 555.
– flashes on the display.
3. The Piece Weight and Tare Weight of PLU 555 will load to OCS.
4. Press to complete PLU Loading process.