User Manual

Section 4: User Operations
08/12 26 51300 Rev. 1
4.5.3. Setup Piece Weight by Sampling (Place Item)
1. Set the Piece Weight on ZERO.
– The scale will calculate the Piece Weight Value by what is added and Piece
Count Number, as described below.
2. Press the key.
– The second row of LCD displays .
– The third row displays a default value of 100.
3. Enter the new sampling quantity using the keypad.
4. Place the items to be weighed onto the scale pan.
– Wait five (5) seconds for the weight to stabilize.
– The Piece Weight calculates automatically, or press the key
to calculate immediately.
5. Press to clear the Piece Weight.
EXAMPLE
1. Press .
2. Press to set this at the number of Pieces.
– This displays on the third line.
3. Place a one pound (1 lb) test weight on the scale weighing pan.
– Wait five (5) seconds for the weight to stabilize.
– The Piece Weight displays as 0.2, and the Piece Count displays as five
(5).
NOTE: If weighing is performed on an external scale, after pressing , the
sampling job continues on main scale automatically when AUTO SWITCH
is configured in the Scale Counting Parameter Setting.