User Manual

Section 3: Assembly
08/12 14 51300 Rev. 1
3.2. WHEEL & PILLAR ASSEMBLY, CONTINUED
16. With the Scale Base Assembly (#4) in an upright position Screw the two (2)
Pillar Rods (#1) into the two (2) tapped holes of the base.
17. Place the Pillar (#2) over the pillar rods.
– The cutouts face to the left and right of the platform
18. Insert the Steelyard Rod (#35) down through the pillar.
– The bent hook is on top, and the loose swivel hook is on the bottom.