Owner's manual

Section 4: Assembly
02/2011
12 51260 -- Rev. 1
E. Insert the “S” hook (#3) (Figure 4-2) through the eyelet of the load cell linkage
cable adapter.
F. Slide the “S” hook bottom into the top hook on the pull rod.
4.3. Installing the instrument
A. Locate the in-line phone plug adapter (#4) and connect the phone plug on the
end of the load cell cable and the phone plug on the end of the instrument
cable into the adapter. See figure 4-3.
B. Locate the cable tie mount (#5) in the bracket approximately as shown.
Secure the load cell cable in place with wire tie (#6). Insure cables do not
touch live portion of the load cell. See figure 4-3.
Figure 4-2