Instructions / Assembly
SPECIFICATIONS
Dimensions
Outside 29.5” wide x 23” deep x 23.6” high (750 x 584 x 600 mm)
Weight 110 lbs (50 kg)
Functional
Operating Power / Current 110V: 110W / 1 A, 240V: 115W / 550 mA
Standby Power / Current 110V: 6W / 130 mA, 240V: 9W / 100mA
Input Voltage 110-240VAC, 50/60 Hz (voltage uctuation ±10%)
Transient over voltages allowed up to category II
Temporary over voltages allowed to occur on mains supply
Power Connection Connect to branch circuit rated 20A max
Fuse Protection 5x20mm, Slow Blow, 10A, 250V
Note: Disconnect main power supply before replacing fuse.
Débranchez l’alimentation principale avant de remplacer le
fusible.
Environmental
Operating 41°F (5 °C) to 104 °F (40 °C) temperature
Maximum relative humidity 80% for temperatures up to 88°F
(31°C), decreasing linearly to 50% relative humidity at 104° F (40°C)
Note: Under 41°F (5°C) temperature must run warm-up cycle before
disinfecting. See Operating section.
Storage -20 °F (-28 °C) to 140 °F (60 °C) temperature, 10-95% humidity
Note: Allow unit to reach operating temperature before use.
Pollution Degree 2
UV-C Light Source
Germicidal Lamps 20W UV-C Lamps (4)
Output 254 nm UV-C Light
Chamber Components
Controller See Touchscreen Display section.
Emergency Switch Located on both sides of the machine, buttons turn OFF
chamber in case of emergency (re, smoke, etc.).
Tray / Reective Liner The tray and reective liner rest inside the bottom of the
chamber and are removable for easy cleaning.
Windows The tempered glass windows are opaque to UV-C.
Germicidal Lamps There are four (4) 20W germicidal UV-C lamps.
Magnet Securely holds doors in closed position while running.
Door Gasket Seals chamber during operation to keep light from escaping.
3