Manual de instalación y uso de la lavadora-secadora Manuel d’installation et d’utilisation de le lave-linge séchant Manual de instalação e utilização da máquina de lavar-secar Washer-dryer installation and operation manual
lavadora índice ADVERTENCIAS 4 ESPECIFICACIONES 5 INSTALACIÓN Y MONTAJE 6 USO DEL APARATO Y CONSEJOS PRÁCTICOS 10 MANTENIMIENTO Y LIMPIEZA DEL APARATO 20 SEGURIDAD Y SOLUCIÓN DE PROBLEMAS 22 ADVERTENCIAS SOBRE EL MEDIO AMBIENTE 25 lave-linge index AVERTISSEMENTS 26 SPÉCIFICATIONS 27 INSTALLATION ET MONTAGE 28 UTILISATION DE L’APPAREIL ET CONSEILS PRATIQUES 32 MAINTENANCE ET ENTRETIEN DE L’APPAREIL 42 SÉCURITÉ ET RÉSOLUTION DE PROBLÈMES 44 AVERTISSEMENTS SUR L’ENVIRONNEMENT 47
máquina de lavar roupa índice ADVERTÊNCIAS 48 QUADRO TÉCNICO 49 INSTALAÇÃO E MONTAGEM 50 UTILIZAÇÃO DO APARELHO E CONSELHOS PRÁTICOS 54 MANUTENÇÃO E LIMPEZA DO APARELHO 64 SEGURANÇA E SOLUÇÃO DE PROBLEMAS 66 ADVERTÊNCIAS SOBRE O MEIO AMBIENTE 69 washing machine contents WARNINGS 70 SPECIFICATIONS 71 INSTALLATION AND ASSEMBLY 72 USING THE APPLIANCE.
warnings To avoid the risk of fire, electric shocks, injury or damage when using your washing machine, please take the following precautions: This washing machine comes with a manual that includes operating, maintenance and installation instructions. Please read all the instructions before using the washing machine.
washing machine specifications Power cord Work top Control panel Detergent dispenser Drain hose Stainless steel drum Hatch Accesible filter (behind kickplate) Kickplate Adjustable feet ACCESSORIES Water inlet hose.
washing machine installation and assembly AND 1 UNPACKING UNBLOCKING THE a WASHING MACHINE UNPACKING a Remove the base, corner protectors and top cover. UNBLOCKING a Remove the screws holding the plastic covers to the back of the washing machine. b Loosen and remove the 3 blocking screws. Important c Cover the holes with the plastic covers you have just removed. a/c Do not throw the blocking screws away. You may need to move the washing machine at a later date.
TO THE MAINS WATER SUPPLY AND 2 CONNECTION DRAINAGE installation and assembly CONNECTION TO THE MAINS WATER SUPPLY The water supply hose is inside the drum: a Connect the bent end of the hose to the threaded inlet of the electrovalve located at the rear of the washing machine. Important b Connect the other end of the hose to the water intake. Then securely tighten the connection nut.
THE WASHING MACHINE AND CONNECTING 3 LEVELLING IT TO THE MAINS ELECTRICITY SUPPLY installation and assembly Important LEVELLING Use the adjustable feet to level the washing machine. This will reduce the noise level and prevent it from moving during use. Do not bring the feet too far out, you will achieve better stability. You need to use a spanner for the models that have a nut.
THE WASHING MACHINE UNDER A KITCHEN 4 INSTALLING WORKTOP AND PRE-CLEANING INSTALLATION UNDER A WORKTOP a Your washing machine may be fitted underneath a kitchen worktop. If you need to remove the washing machine’s worktop, for safety reasons you need to fit a protection plate which you can obtain from your Dealer or Technical Assistance Service. Follow these steps to fit the plate: a Remove the washing machine work top by taking out the side screws and moving it gently back.
washing machine using the appliance and practical tips 1 PREPARING GARMENTS FOR WASHING Important PREPARATION Before placing the clothes in the drum, make sure all the pockets are empty. Any small objects may block the drain pump. Important SORTING THE CLOTHES Make sure beforehand that your woollens can be machinewashed. a Sort the clothes according to fabric and how they are made: We recommend using the delicate programmes for sensitive fabrics. There is a special wool programme for woollens.
2 USING DETERGENT AND ADDITIVES using the appliance and practical tips DETERGENT AND ADDITIVES a a Your washing machine’s detergent dispenser has three compartments. b Put the detergent or additive into the detergent dispenser before starting the wash programme. c Liquid detergents may also be used in this washing machine. An optional detergent dispenser is to be used for this, which can be obtained from the Technical Service Network.
3 SELECTING THE WASH AND DRY PROGRAMME using the appliance and practical tips screen detergent dispenser ON/ programme start/ OFF selector pause button button The procedure for selecting the wash and dry programme is as follows: a a Switch the washing machine on by pressing ON / OFF. b Activate the programme selector by pressing it to release it. c Select the wash programme by turning the programme selector dial (see programme table).
using the appliance and practical tips When you select the programme, the following information will be displayed: 1 1 Wash and dry programme phases: Wash Rinse Spin-drying Dry 2 2 Spin speed 3 4 3 Programme nº (for a few seconds) and then programme duration.
Normal prog. Delicate prog. Aux. prog.
Anti-crease Max load of clothes (Kg) Wash product compartment TURBO TIME PLUS Programme description Total consumption KWh/Litres Approx.
4 SPIN SPEED SELECTION using the appliance and practical tips SPIN-DRYING a The wash options must always be selected after choosing the wash programme. Any programme change during selection cancels the previously selected options. a Spin speed selection and anti-crease button The selected programme has its own particular spin speed. Select b You can change it by repeatedly pressing the spin button. The spin speed will gradually be reduced at 100 r.p.m. intervals to 400 r.p.m. for display models.
5 TIME DELAY SELECTION AND ADDITIONAL FUNCTIONS using the appliance TIME DELAY Time delay selection button A delay of up to 24 hours can be selected. The delay must be selected after choosing the wash programme. To select the hours of delay, press the clock button. Each time the button is pressed the start of washing is delayed by 1 more hour. Select Cancelling the delay To cancel the delay you have to press the clock button successively.
UP AND 6 STARTING BLOCK FUNCTION SELECTION using the appliance STARTING UP a Start/pause button a To start up the washing machine you have to press the start/pause button. The minutes remaining until the end of washing and drying will appear on the display at all times. Select BLOCK FUNCTION a Block function selection The lock function ensures that the programme will not be affected if any buttons are pressed. It is used when children could press the buttons, etc.
PROGRAMME PHASES 7 WASH AND POWER CUTS using the appliance PROGRAMME PHASES When the programme is running, the programme phase and the time remaining for it to end will appear on the display.. The active phases will appear successively at the top of the display as the programme progresses. The time remaining until the end of the programme will also appear on the display. It updates at regular intervals, but not minute by minute.
washing machine maintenance and cleaning MAINTENANCE After each wash, leave the door open for a while to allow the air to circulate freely inside the machine. Important From time to time, depending on the hardness of your water, it is recommendable to run a full wash cycle using a decalcifying product. This will extend the life of your washing machine. The washing machine should be disconnected from the mains electricity supply before any cleaning or maintenance is carried out.
2 CLEANING THE ACCESISBLE FILTER AND THE OUTSIDE maintenance and cleaning CLEANING THE FILTER a Clean the accessible filter if the drain pump is blocked by any foreign objects. a Remove the kickplate by pulling gently on its edges and turning it downwards, to release the clips. If you do not have access from the side, insert a small screwdriver into the three slots at the top of the kickplate, in order to get leverage and release the clips.
washing machine safety and troubleshooting Indicator Problems FO1 No water coming in FO2 Does not drain or spin-dry If this is not the case, unplug the appliance and contact the TECHNICAL ASSISTANCE SERVICE. CO3 Does not spin-dry FO4 Does not start FO5 . . . . . F10 Call the Technical Assistance Service Important If you detect any problems with your washing machine, you will probably be able to rectify them yourself by consulting the following instructions. Never open up the appliance.
safety and troubleshooting Why doesn’t the washing machine take in water? Indicator F01, no water coming in, this may be due to a cut in the water supply, a tap turned off or a blocked water inlet filter. The possible solutions are as follows: wait for the water supply to be reconnected, turn on the tap, or remove the water inlet hose and clean the filter. If this failure is detected, F01 will appear on the display.
safety and troubleshooting Why is there still some water in the dispenser? This may be because the dispenser needs cleaning. This simple operation is described in Maintaining and cleaning the appliance. 1- Cleaning the detergent dispenser. Why can’t I open the hatch immediately after the wash has finished? Washing machines today are provided with safety systems for users. One of them is that the washing machine cannot be opened until it is certain that the drum is quite still.
washing machine environmental warnings eco-note INFORMATION FOR THE CORRECT DISPOSAL OF WASTE ELECTRICAL AND ELECTRONIC APPLIANCES When your appliance is of no further use, it should not be disposed of together with general domestic waste. It can be taken, free of charge, to a specific waste collection centre, run by your local authority, or dealers who provide this service.
Fagor Electrodomésticos, S.Coop. Apartado 49 Tel. (943) 71 91 00 / 01 Fax (943) 79 68 81 Bº San Andrés, 18 20500 MONDRAGÓN (Guipúzcoa) www.fagor.com e-mail: info@fagor.
