Operation Manual

11
B
2. At the back of the oven you will  nd a 3-wire “A”which is used to make the
electrical connection in this way:
3. After it is connected, place the oven into the cabinet opening, taking special
care not to leave any surplus cable lying on top of the oven.
4. Fasten the oven to the cabinet with the 2 screws provided.
5. If the cooking function selector is not at position “0”, turn it to “0”and set the
time on the oven( section 7.1).
WARNING: before making any connections, check the following:
• that the power supply corresponds to the voltage indicated on the feature
identi cation plate B,  gure 2.
• that the power supply of the oven is to be connected to is powerful
enough for the maximum power the oven absorbs, indicated on the
feature identi cation plate.
Oven Wire Color House Wire Color
ELECTRICAL SPECIFICATIONS
Black
White
Green/Yellow
Black (L1)
Red (L2)
White (Neutral) & Green/Copper
(Ground)
Model Volts Watts Amps
5HA-196 X
5HA-200 LX
5HA-200 RX
240 3.6 KW 15
-Figure 2-