GUIDE FOR INSTALLATION AND USE GB - Cooking Hob COD. 208248 - REV0 - 30.08.
Dear Customer, You have just acquired a FAGOR hob and we would like to thank you. Our research teams have created a new generation of appliances for you. Their quality, design, features and technological advances make them exceptional products and reveal our unique know-how. In the line of FAGOR products, you will also find a wide range of ovens, microwave ovens, ventilation hoods, dishwashers, and refrigerators, all of which can be integrated and all of which can be coordinated with your new FAGOR hob.
INSTRUCTIONS FOR THE USER It is necessary that all the operations regarding the installation, adjustment and adaptation to the type of gas available are carried out by qualified personnel, in conformity with the regulations in force. The specific instructions are described in the booklet section intended for the installer. USING THE BURNERS these substances can catch fire when overheated. - Do not use sprays near the appliance in operation.
INSTRUCTIONS FOR THE INSTALLER IMPORTANT NOTICE: THE OPERATIONS INDICATED BELOW MUST BE FOLLOWED BY QUALIFIED PERSONNEL EXCLUSIVELY, IN CONFORMITY WITH THE REGULATIONS IN FORCE. THE MANUFACTURING FIRM REFUSES ALL RESPONSIBILITY FOR DAMAGES TO PEOPLE, ANIMALS OR THINGS, RESULTING FROM THE FAILURE TO COMPLY WITH SUCH PROVISIONS. INSTALLATION Fastening the top Every cook-top is equipped with a special washer. A set of hooks is also supplied for mounting the cook-top.
INSTRUCTIONS FOR THE INSTALLER Gas connection Make sure that the appliance is adjusted for the gas type available (see the label under the appliance). Follow the instructions indicated in the chapter “gas transformations and adjustments” for the possible adaptation to different gases. The appliance must be connected to the gas system by means of stiff metal pipes or flexible steel pipes having continuous walls, in compliance with the regulations in force.
Close Maximun Minimum 1 2 3 4 5 6A 7 6 8 10 9 6 10/A
5FI-4GLSX 5FI-4GLSTX 5FI-5GLSTX 5FI-95GLSTX 1 Rapid burner 2 Semi-rapid burner 3 Auxiliary burner 4 Triple ring burner 8 Control knob for burner 3000 W 1750 W 1000 W 3800 W 7
TECHNICAL CHARACTERISTIC TABLES INJECTOR DIAMETER TAPE BY PASS DIAMETER mbar g/h L/h 1/100 mm 1/100 mm Max. Min. G30-G31 28 - 37 225 - 85 42 3000 950 G20 20 - 290 115Y Reg. 3000 950 G30-G31 28 - 37 126 - 65 31 1750 600 G20 20 - 165 97Z Reg. 1750 600 G30-31 28 - 37 71 - 50 27 1000 450 G20 20 - 99 72X Reg. 1000 450 G30-G31 28 - 37 278 - 98 60 3800 2100 G20 20 - 367 135K Reg.
