Operation Manual

LA TABLE DE CUISSON A INDUCTION
Formation technique
- 37 -
CU3-INDUCTION-003UK-10/05
IX6
13.3. - Power circuit description
The power circuit uses the same principle as IX3WR (for the main components).
• 4 diodes rectifier
• The front / rear power distribution by relay is replaced by the inverter stage doubling. The result
is: 2 x 2 recovery diodes, 2 x 2 capacitors, 2 X 2 Transistors
• A current transformer by inverter to ensure container detection.
• Use of IGBT transistors. The IGBT (Insulated Gate Bipolar Transistor) is a bipolar transistor that
is voltage controlled. It associates the advantages of bipolar transistors (high voltages and
currents) and those of MOSFET transistors (high-speed switching, low control energy).
• A relay provides control of a 'triple crown' source.