Operation Manual

THE INDUCTION HOB

Technical training

- 31 -

CU3-INDUCTION-003UK-10/05

IX3 WR

11 - THE IX3WR HOBS

11.1. - Description

The hob of generation IX3

WR (like IX3) is identified

by the presence of a

mounting part that appears

under the hob, the

ventilation section, and its

internal composition of two

boards (filter and power),

the keyboard that can have

various shapes according

to the trademark and

model. The power board

was modified, the heat sink

occupies all the height of the board and both relays have

disappeared.

IX3WR allows piloting specific sources, such as the Krône

inducer or the triple-crown inducer that justifies the presence

of a relay on the board. This relay is not a power

distribution relay.

Standby consumption is under 1 Watts.

Filter board

230V~

Grounding screw, its

presence is

impérative

Fan power supply

Rear temperature

sensor

Keyboard ply

Triple-crown inducer

relay

Transistors

Diode bridge

Front temperature

sensor

Power board