Operation Manual

THE INDUCTION HOB
Technical training
- 19 -
CU3-INDUCTION-003UK-10/05
USE
6.5.5. - Safety in case of overflow
In case of overflow, induction ho bis equipped with a safety feature. This function allows an automatic
switch off of the hob with signal ‘-‘ and an audible alert.
• Overflow covering the control keys.
• Wet towel covering the control keys.
• Metallic object put on the control keys
6.5.6. - "Small objects"
A small pan, a fork, a spoon or each other small objects are not detected as a container. The display
flashes, no power is delivered.
6.5.7. - Pacemakers and active implants
The hob operation is in accordance with the standards on electromagnetic interference in force. The
induction hob meets thus perfectly the legal requirements (directives 89/336/CEE). The hob is
designed not to hinder the operation of other electrical appliances to the extent where they comply with
the same regulations. An induction hob generates magnetic fields in its very close environment.
To prevent interference with a pacemaker, the pacemaker must be designed in accordance with the
regulation concerning it. For any information regarding the conformance or no of a pacemaker, the
consumer must get information from the manufacturer or his/her attending physician.
6.5.8. - Temperature limiter
Each inducer uses a NTC sensor measuring the container temperature through the glass. This system
help protecting the hob and the containers against over heating (Pan without food for example).
In case of overheating, the temperature of the pan is regulated around 300°C. This temperature does
not allows the deterioration of the PFTE (anti sticking material used in the pans).Damages start above
340/350°C.