Operation Manual

THE INDUCTION HOB
Technical training
- 17 -
CU3-INDUCTION-003UK-10/05
USE
6.3. - ‘Booster’ function
This function concentrates the maximum power on only one inducer.
The "Boost", "MAX" or "Express" function are not made to cook during
a long time but for a speed increase of the temperature in order to boil
water for example.
Boost function atomically limits the power of the other inducer.
6.4. - "STARTCONTROL"
This function allows programming of the end-of-cooking time.
It’s necessary to set :
¾ End of cooking time (24H possibles)
¾ A duration (99 min. maxi)
¾ A cooking power (limited at 6 in order to cook lovingly or keep warm)
1. Press the 0/1 key "STARTCONTROL"
2. Display the clock by pressing +/- keys "STARTCONTROL"
3. Set the cooking time
Example : 12h10
The inducer’s power displays automatically
4. Set the cooking duration
5. It’s possible to adjust the power
6. Parameters are registered; a "d" is displayed for few seconds and disappears.
Display lights up automatically when the start time has been reached and without "d".
Press the on/off key to cancel the programming.