Operation Manual

THE INDUCTION HOB
Technical training
- 14 -
CU3-INDUCTION-003UK-10/05
INSTALLATION
¾ Above a dishwasher
It is necessary to cover the top of the
dishwasher with a plastic sheet (ASS reference
75X1652).
Ensure a fresh air inlet and a front outlet of
4mm mini.
5.4. - Electrical connection
Hobs with three or more sources have five wires to be
connected. Wires other than the yellow/green shall be
connected in pairs to a 32 Amp connector (connector
specific for cooking).
Hobs loosely fitted, with connecting block or combined with
gas can be connected to a 16 A connector (Conventional
connector).
If the user has three-phase power supply, the connection
can be distributed over two phases by separating the black
wires of the 5-way cord.
The advantage is to work only with a 16A protection.
On hob power-up or after prolonged power cut, a luminous code is displayed on the keyboard. It
disappears automatically after 30 seconds, or from the first action on any one key on the keyboard.
In case a appliance is used, which would not be grounded or would include a defective
ground connection, the manufacturer's responsibility would not be committed