Operating Guide

Overview (continued)
Rigid PVC Pipe
Additional materials required
- Mounting screws (1/4” x 2” long, outdoor screws) & roof sealant
- PVC primer, PVC cement, and PVC ttings
- (2) 1-1/2” PVC tees, (6) 1-1/2” PVC elbows (varying with installation)
- 1-1/2” Sch.40 PVC pipe to connect solar system to pool equipment
Tools required:
- PVC pipe cutters or equivalent
- Flat head screwdriver or 5/16” nut driver for tightening hose clamps
• Power drill with 1/8” pilot drill bit and a Phillips head bit
Contents
Your system includes one solar collector, along with mounting hardware, connection
hardware, and integrated bypass valve. See the list below for the contents of your ex-
act system:
Flexible Pool Hose
Additional materials required:
- 1-1/2” I.D.exible hose
- Ground spikes (ground installation)
- Optional roof or rack mounting:
* Mounting screws (1/4” x 2” long, outdoor screws) & roof sealant
* Ground rack lumber and materials
Tools required:
- Flat head screwdriver or 5/16” nut driver
- Optional roof or rack mounting:
* Power drill with 1/8” pilot drill bit and a Phillips head bit
2
Component 975-3
4’ x 20’ Wide Solar
Collector with 1-1/2”
barb connections
1
Mounting Cap 12
Mounting Base 12
Mounting Strap 6
Valve Handle 1
Rubber tube plugs 20