98/99™ Series Exit Devices
98/99™ Finishes Finishes* Color US Number BHMA Number Chromium, Polished US26 625 Anodized, Aluminum US28 628 Chromium, Dull US26D 626 Brass, Polished US3 605 Brass, Dull US4 606 Bronze, Dull US10 612 Anodized Duranodic (Dark Bronze) 313AN 710 Anodized Black 315AN –– Pushpad Options — Knurled Embossed “Push” Braille (Caution-Stairwell), satin stainless steel only SS – (EMERGENCY EXIT – PUSH TO OPEN AND SOUND ALARM) – Red Silkscreen lettering on US32D * NOTE: Durable powder coated
98/99™ Exit Devices Index Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Exit Hardware • Rim Devices • 98/99™ Rim Exit Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 • 98/99™ Rim Exit Device Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
98/99™ Exit Devices Index, pg. 2 Device Electrical Options • EL Electric Latch Retraction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 • E - Electric Rim Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 • E7500 Mortise Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
98/99™ Exit Devices Introduction Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin designs and manufactures exit devices in accordance to ISO 9001 Quality Management System and meets or exceeds accepted U.S. domestic and International standards. All 98 and 99 series exit devices are UL listed for Panic Hardware or Fire Hardware, and are certified to ANSI A156.3, 2001, Grade 1.
98/99™ Rim Exit Device 299 Strike 98 and 99 rim exit devices for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 98 device has a smooth mechanism case and the 99 device has a grooved case. The rim device is non-handed except when the following device options are used: SD (Special Dogging), -2 (Double Cylinder) or SS (Signal Switch). See Opposite page for available outside trim and device functions.
98/99™ Rim Exit Device Standard Trim Exit only Dummy Trim Pull when Dogged 98EO 99EO 98DT 99DT 98NL 99NL 98NL-OP 99NL-OP Trim Description –– 990DT 990NL-R/V 110NL-MD 110NL-WD Escutcheon Plate Size –– 3" x 14³ ₁₆" x ³ ₃₂" (76x360x2mm) 3" x 14³ ₁₆" x ³ ₃₂" (76x360x2mm) –– Pull Center to Center –– 5¹ ₂" (140mm) 5¹ ₂" (140mm) –– Projection –– 2" (51mm) 2" (51mm) –– ANSI Function 01 02 03 03 Cylinder Type –– –– Rim Rim Optional Trim (See pages 32 – 34) x990EO x992EO x994EO x9
98-F/99-F Rim Fire Exit Device 299F Strike 98-F and 99-F rim fire exit devices for all types of single doors up to 4´ x 10´ (1219mm x 3048mm) or 8´ x 10´ (2438mm x 3048mm) double doors with 9954 or 9854 mullion, UL listed for Fire Exit Hardware. See page 41 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1. The 98-F device has a smooth mechanism case and the 99-F device has a grooved case.
8-F/99-F Fire Exit Rim Device Standard Trim Exit only Dummy Trim Pull when Dogged (Not recommened for Fire Device) 98EO-F 99EO-F –– –– 98NL-F 99NL-F 98NL-OP-F 99NL-OP-F Trim Description –– 990DT 990NL-R/V 110NL-MD 110NL-WD Escutcheon Plate Size –– 3" x 14³ ₁₆" x ³ ₃₂" (76x360x2mm) 3" x 14³ ₁₆" x ³ ₃₂" (76x360x2mm) –– Pull Center to Center –– 5¹ ₂" (140mm) 5¹ ₂" (140mm) –– Projection –– 2" (51mm) 2" (51mm) –– ANSI Function 01 02 03 03 Cylinder Type –– –– Rim Rim x990EO x9
9875/9975 Mortise Lock Device 9875/9975 mortise lock device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Fits stock hollow metal doors with 86 cutout and door stiles as narrow as 4 ³ ₄" (121mm). The 9875 device has a smooth mechanism case and the 9975 device has a grooved case. The mortise lock device is non-handed except when the following device options are used: -2 (Double Cylinder) or SS (Signal Switch).
9875/9975 Mortise Lock Device Standard Trim Exit only Dummy Trim Pull when Dogged 9875EO 9975EO 9875DT 9975DT 9875NL 9975NL 9875HL 9975HL Trim Description –– 990DT 990NL-M HL6M Escutcheon Plate Size –– 3" x 14³ ₁₆" x ³ ₃₂" (76x360x2mm) 3" x 14³ ₁₆" x ³ ₃₂" (76x360x2mm) 2⁹ ₁₆" x 5¹ ₂" x 2⁵ ₈" (65x140x67mm) Pull Center to Center –– 5¹ ₂" (140mm) 5¹ ₂" (140mm) –– Projection –– 2" (51mm) 2" (51mm) 2⁵ ₈" (67mm) ANSI Function 01 02 03 –– Cylinder Type –– –– 1¹ ₄" Mortise 1¹ ₄" M
9875-F/9975-F Mortise Lock Fire Exit Device 9875-F/9975-F fire exit mortise lock devices for all types of single doors up to 4´ x 10´ (1219mm x 3048mm) or 8´ x 10´ (2438mm x 3048mm) double doors installations, UL listed for Fire Exit Hardware; See page 41 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1. Fits door stiles as narrow as 4 ³ ₄" (121mm).
9875-F/9975-F Mortise Lock Fire Exit Device Standard Trim Exit only Dummy Trim Pull when Dogged (Not recommened for Fire Device) 9875EO-F 9975EO-F –– –– 9875NL-F 9975NL-F 9875HL-F 9975HL-F Trim Description –– 990DT 990NL-R/V HL6M Escutcheon Plate Size –– 3" x 14³ ₁₆" x ³ ₃₂" (76x360x2mm) 3" x 14³ ₁₆" x ³ ₃₂" (76x360x2mm) 2⁹ ₁₆" x 5¹ ₂" x 2⁵ ₈" (65x140x67mm) Pull Center to Center –– 5¹ ₂" (140mm) 5¹ ₂" (140mm) –– Projection –– 2" (51mm) 2" (51mm) 2⁵ ₈" (67mm) ANSI Function 01 02
9827/9927 Surface Mounted Vertical Rod Device Top Latch 299 Top Strike 9827/9927 surface mounted vertical rod device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The 9827 device has a smooth mechanism case and the 9927 device has a grooved case.
9827/9927 Surface Mounted Vertical Rod Device Standard Trim Exit only Dummy Trim Pull when Dogged Night Latch Key Retracts Latchbolt Night Latch Key Retracts Latchbolt Optional Pull Required Thumbturn Key Locks & Unlocks (Use with DT Trim) Thumbturn Blank Escutcheon Always Operable (No Cylinder) (Use with DT Trim) 9827EO 9927EO 9827DT 9927DT 9827NL 9927NL 9827NL-OP 9927NL-OP 9827TL 9927TL 9827TL-BE 9927TL-BE Trim Description –– 990DT 990NL-R/V 110NL-MD 110NL-WD 374T x 990DT 374T-BE x 990DT
9827-F/9927-F Surface Mounted Vertical Rod Fire Device Top Latch 299F Top Strike 9827-F/9927-F fire exit surface mounted vertical rod device pairs of doors up to 8´ x 10´ (2438mm x 3048mm) , UL listed for Fire Exit Hardware.See page 41 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1. The 9827-F device has a smooth mechanism case and the 9927-F device has a grooved case.
9827-F/9927-F Surface Mounted Vertical Rod Fire Device Standard Trim Exit only Dummy Trim Pull when Dogged (Not recommended for Fire Device) Night Latch Key Retracts Latchbolt Night Latch Key Retracts Latchbolt Optional Pull Required Thumbturn Key Locks & Unlocks (Use with DT Trim) Thumbturn Blank Escutcheon Always Operable (No Cylinder) (Use with DT Trim) 9827EO-F 9927EO-F –– –– 9827NL-F 9927NL-F 9827NL-OP-F 9927NL-OP-F 9827TL-F 9927TL-F 9827TL-BE-F 9927TL-BE-F Trim Description –– 990DT 990N
9857/9957 Three-Point Latching Device Top Latch 299 Top & Middle Strike 9857/9957 three-point latching device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The 9857 device has a smooth mechanism case and the 9957 device has a grooved case. The three-point latching device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).
9857/9957 Three-Point Latching Device Standard Trim Exit only Dummy Trim Pull when Dogged Night Latch Key Retracts Latchbolt Night Lacth Key Retracts Latchbolt Optional Pull Required Thumbturn Key Locks & Unlocks (Use with DT Trim) Thumbturn Blank Escutcheon Always Operable (No Cylinder) (Use with DT Trim) 9857EO 9957EO 9857DT 9957DT 9857NL 9957NL 9857NL-OP 9957NL-OP 9857TL 9957TL 9857TL-BE 9957TL-BE Trim Description –– 990DT 990NL-R/V 110NL-MD 110NL-WD 374T x 990DT 374T-BE x 990DT Escutc
9857-F/9957-F Three-Point Latching Fire Device Top Latch 299F Top & Middle Strike 9857-F/9957-F fire exit three-point latching device for all types of single doors up to 4´ x 8´ (1219mm x 2438mm) or up to 8´ x 8´(2438mm x 2438mm) double doors with 9954 or 9854 mullion, UL listed for Fire Exit Hardware. See page 41 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1.
9857-F/9957-F Three-Point Latching Fire Device Standard Trim Exit only Dummy Trim Pull when Dogged (Not recommended for Fire Device) Night Latch Key Retracts Latchbolt Night Latch Key Retracts Latchbolt Optional Pull Required Thumbturn Key Locks & Unlocks (Use with DT Trim) Thumbturn Blank Escutcheon Always Operable (No Cylinder) (Use with DT Trim) 9857EO-F 9957EO-F –– –– 9857NL-F 9957NL-F 9857NL-OP-F 9957NL-OP-F 9857TL-F 9957TL-F 9857TL-BE-F 9957TL-BE-F Trim Description –– 990DT 990NL-R/V 1
9847/9947 Concealed Vertical Rod Device Top Latch 338 Top Strike 9847/9947 concealed vertical rod device for use on single or double metal doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9847 device has a smooth mechanism case and the 9947 device has a grooved case. The concealed vertical rod device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).
9847/9947 Concealed Vertical Rod Device Standard Trim Exit only Dummy Trim Pull when Dogged Night Latch Key Retracts Latchbolt Night Latch Key Retracts Latchbolt Optional Pull Required Thumbturn Key Locks & Unlocks (Use with DT Trim) Thumbturn Blank Escutcheon Always Operable (No Cylinder) (Use with DT Trim) 9847EO 9947EO 9847DT 9947DT 9847NL 9947NL 9847NL-OP 9947NL-OP 9847TL 9947TL 9847TL-BE 9947TL-BE Trim Description –– 990DT 990NL-R/V 110NL-MD 374T x 990DT 374T-BE x 990DT Escutcheon Pl
9847-F/9947-F Concealed Vertical Rod Fire Device Top Latch 338 Top Strike 9847-F/9947-F fire exit concealed vertical rod device for use on pairs of doors up to 8´ x 10´(2438mm x 3048mm) , UL listed for Fire Exit Hardware. See page 41 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1. The 9847-F device has a smooth mechanism case and the 9947-F device has a grooved case.
9847-F/9947-F Concealed Vertical Rod Fire Device Standard Trim Exit only Dummy Trim Pull when Dogged (Not recommended for Fire Device) Night Latch Key Retracts Latchbolt Night Latch Key Retracts Latchbolt Optional Pull Required Thumbturn Key Locks & Unlocks (Use with DT Trim) Thumbturn Blank Escutcheon Always Operable (No Cylinder) (Use with DT Trim) 9847EO-F 9947EO-F –– –– 9847NL-F 9947NL-F 9847NL-OP-F 9947NL-OP-F 9847TL-F 9947TL-F 9847TL-BE-F 9947TL-BE-F Trim Description –– 990DT 990NL-R/V
9848/9948 Concealed Vertical Rod Device Top Latch 338 Top Strike 9848/9948 Concealed vertical rod device for use on single or double metal doors, UL listed for Panic Exit Hardware. Covers stock hollow metal doors with 86 or 161 cutouts. Devices are ANSI A156.3 – 2001 Grade 1. The 9848 device has a smooth mechanism case and the 9948 device has a grooved case. The concealed vertical rod device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).
9848/9948 Concealed Vertical Rod Device Standard Trim Exit only Dummy Trim Pull when Dogged Night Latch Key Retracts Latchbolt Night Latch Key Retracts Latchbolt Optional Pull Required Thumbturn Key Locks & Unlocks (Use with DT Trim) Thumbturn Blank Escutcheon Always Operable (No Cylinder) (Use with DT Trim) 9848EO 9948EO 9848DT 9948DT 9848NL 9948NL 9848NL-OP 9948NL-OP 9848TL 9948TL 9848TL-BE 9948TL-BE Trim Description –– 990DT 990NL-R/V 110NL-MD 374T x 990DT 374T-BE x 990DT Escutcheon Pl
9848-F/9948-F Concealed Vertical Rod Fire Device Top Latch 338 Top Strike 9848-F/9948-F concealed vertical rod device for use on pairs of doors up to 8´ x 10´(2438mm x 3048mm), UL listed for Fire Exit Hardware. See page 41 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1. The 9848-F device has a smooth mechanism case and the 9948-F device has a grooved case.
9848-F/9948-F Concealed Vertical Rod Fire Device Standard Trim Exit only Dummy Trim Pull when Dogged (Not recommended for Fire Device) Night Latch Key Retracts Latchbolt Night Latch Key Retracts Latchbolt Optional Pull Required Thumbturn Key Locks & Unlocks (Use with DT Trim) Thumbturn Blank Escutcheon Always Operable (No Cylinder) (Use with DT Trim) 9848EO-F 9948EO-F –– –– 9848NL-F 9948NL-F 9848NL-OP-F 9948NL-OP-F 9848TL-F 9948TL-F 9848TL-BE-F 9948TL-BE-F Trim Description –– 990DT 990NL-R/V
9847/9947 Wood Door Concealed Vertical Rod Device Top Latch 338 Top Strike 9847WDC/9947WDC concealed vertical rod device for use on single or double wood doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 9847WDC device has a smooth mechanism case and the 9947WDC device has a grooved case. The concealed vertical rod device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).
9847/9947 Wood Door Concealed Vertical Rod Device Standard Trim Exit only Dummy Trim Pull when Dogged Night Latch Key Retracts Latchbolt Night Latch Key Retracts Latchbolt Optional Pull Required Thumbturn Key Locks & Unlocks (Use with DT Trim) Thumbturn Blank Escutcheon Always Operable (No Cylinder) (Use with DT Trim) 9847WDC-EO 9947WDC-EO 9847WDC-DT 9947WDC-DT 9847WDC-NL 9947WDC-NL 9847WDC-NL-OP 9947WDC-NL-OP Trim Description –– 990DT 990NL-R/V 110NL-WD Escutcheon Plate Size –– 3" x 14³ ₁₆
9847WDC-F/9947WDC-F Wood Door Concealed Vertical Rod Fire Device Top Latch 338 Top Strike 9847WDC-F/9947WDC-F fire exit concealed vertical rod device for use on pairs of doors up to 8’ x 9’ 3” (2438mm x 2819mm) double wood doors, UL listed for Fire Exit Hardware. See page 41 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2001 Grade 1. The 9847WDC-F device has a smooth mechanism case and the 9947WDC-F device has a grooved case.
9847WDC-F/9947WDC-F Wood Door Concealed Vertical Rod Fire Device Standard Trim Exit only Dummy Trim Pull when Dogged (Not recommended for Fire Device) Night Latch Key Retracts Latchbolt Night Latch Key Retracts Latchbolt Optional Pull Required Thumbturn Key Locks & Unlocks (Use with DT Trim) Thumbturn Blank Escutcheon Always Operable (No Cylinder) (Use with DT Trim) 9847WDC-EO-F 9947WDC-EO-F –– –– 9847WDC-NL-F 9947WDC-NL-F 9847WDC-NL-OP-F 9947WDC-NL-OP-F Trim Description –– 990DT 990NL-R/V 110
98/99™ Optional Trim Knob and Thumbpiece Trim Knob Key Locks & Unlocks Trim Description Knob – Night Latch Key Retracts Latchbolt Projection ANSI Function Knob – Dummy Trim Pull when Dogged Thumbpiece Key Locks & Unlocks 990TP Thumbpiece Blank Escutcheon Always Operable (No Cylinder) 991K 991K-NL 991K-BE 991K-DT 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" (70x273x21mm) 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" (70x273x21mm) 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" (70x273x21mm) –– –– –– –– 5¹ ₂" (140mm) 5¹ ₂" (140mm)
98/99™ Optional Lever Trim 996L Trim The new 996L Breakaway™ trim has become the standard lever trim offering on the 98L/99L series devices. The 996L trim blends two successful Von Duprin designs; the look of the traditional 992L lever trim and the security and durability of the Von Duprin Breakaway™ design. The Breakaway™ design is especially effective in areas where vandalism to door hardware is a problem. The design intent is to discourage costly repairs from becoming necessary.
98/99™ Exit Rim Device Optional Lever Trims – 696/697 Dummy Trim Pull when Dogged (Not recommended for Fire Device) Trim Description Dummy Trim Pull when Dogged (Not recommended for Fire Device) Night Latch Key Retracts Latchbolt Night Latch Key Retracts Latchbolt 696DT 697DT 696NL 697NL 1⁵ ₈" x 13¹ ₂" x ³ ₁₆" (41x343x5mm) 1⁵ ₈" x 13¹ ₂" x ³ ₁₆" (41x343x5mm) 1⁵ ₈" x 13¹ ₂" x ³ ₁₆" (41x343x5mm) 1⁵ ₈" x 13¹ ₂" x ³ ₁₆" (41x343x5mm) 5¹ ₂" (140mm) 2¹ ₆" (52mm) 5¹ ₂" (140mm) 3" (76mm) 5¹ ₂" (140mm)
98/99™ Trim Operation Selection Operation Options Lever and Knob Operations 374T/376T Series Thumbturn Control (Shown with 990DT Trim) Standard operation, key locks and unlocks lever or knob. e.g., 996L (Classroom) Night latch, key retracts latch bolt. Lever or knob is rigid. Use NL suffix, e.g. 996LNL. (Storeroom) Blank escutcheon, lever or knob always active. Use BE suffix, e.g., 996L-BE. (Passage) Dummy trim, lever or knob rigid for pull operation. Use DT suffix, e.g., 996L-DT.
98/99™ CM993 and PRO993 Exit Trim The Von Duprin Computer Managed CM993 Exit Trim is a stand-alone, battery-powered exit trim for use on doors where an exit device is required for egress. The CM993 is designed to be used with Von Duprin 98/99™ Rim and Vertical Rod exit devices for unmatched access control and ease of use. It can be programmed with LockLink™ or LockLink™ Express access control management software.
How To Order CM993 and PRO993 Exit Trim CM993 – MGK – 06 – LH – KD – 695 – EXT Select Model Select Access Credential Option Select Lever Select Handing Select Key Cylinder Option Select Finish Select Trim Options 4. Select Handing 1. Select Model CM993 Computer managed exit trim PRO993 Manually programmed exit trim RH Right Hand LH Left Hand Note: Handing is field-reversible 5. Select Key Cylinder Option KD Schlage Everest Cylinder LC Less Cylinder Note: Master keyed cylinders order separately 6.
98/99™ Strike/Stile Information STANDARD SINGLE DOOR DEVICE TYPE STRIKE 98/99 299 STANDARD DOUBLE DOOR TRIM/STILE 990/992 696/697 994/996 4-1/2" 4-3/8" (114mm) (111mm) STRIKE W/MULLION* TRIM/STILE 990/992 696/697 994/996 299 x 4954 4-7/8" 4-3/4" (124mm) (121mm) 98-F/99-F 299F 4-1/2" 4-3/8" (114mm) (111mm) 499F x 9954 9875 9975 575 4-3/4" 4-3/4" (121mm) (121mm) 575-2 –– 9875-F 9975-F 575 4-3/4" 4-3/4" (121mm) (121mm) 575-2 –– 9857 9957 299 (Top) 299 (Middle) 304L/284-L (Bottom) 985
98/99™ Strike Information Strikes for rim devices 264 299 299F 499F Projection 9/16" (14mm) Projection 13/16" (21mm) Projection 13/16" (21mm) Projection 15/16" (24mm) 1408 1439–Blade Stop 1410–Integral Stop One per pair of doors Projection 1/2" (13mm) Projection 1/2" (13mm) 1606 1609 Projection 3/8" (10mm) Panic Devices Only • Requires Coordinator • For Fire Rated Application, consult factory Strikes for vertical rod devices 248L-4 Projection 3/8" (10mm) 260U–Flush Transom Only 299 Pr
Grade, Type, Function Options and Dimensions ANSI Grade, Type & Function Function Grade 1, Type 1 Grade 1, Type 2 Grade 1, Type 3 Grade 1, Type 7 Grade 1, Type 8 Grade 1, Type 9 01 98EO, 98EO-F 99EO, 99EO-F 9827EO, 9827EO-F 9927EO, 9927EO-F 9875EO, 9875EO-F 9975EO, 9975EO-F 9847WDC-EO & EO-F 9947WDC-EO & EO-F 9847EO, 9848EO-F 9947EO, 9947EO-F 9857EO, 9857EO-F 9957EO, 9957EO-F 02 98DT 99DT 9827DT 9927DT 9875DT 9975DT 9847WDC-DT* 9947WDC-DT 9848DT 9948DT 9857DT 9957DT 03 98NL, 98NL-F 99
UL Listing for Fire Exit Hardware UL Listed Fire Exit Hardware Label and Opening Size Exit Device Door Material 98-F Metal 99-F 9875-F Metal 9975-F 9827-F Metal 9927-F 9827LBR-F Metal 9927LBR-F 9857-F Metal 9957-F 9847-F Metal 9947-F 9847LBR-F Metal 9947LBR-F 9848-F Metal 9948-F Double Door With 9954 With 9854 With KR9954 With KR9854 VR/VR VR/Mortise VR/VR Single Door Mullion Mullion Mullion Mullion Same Direction Same Direction Double Egress 3 Hour 3 Hour 3 Hour 3 Hour 3 Hour –– –– –– 4’ x 10’ 8’ x 10’ 8
98/99™ Electrical Options Alarm Kit – ALK Request to Exit — RX The ALK battery alarm kit is a simple yet effective way to deter unauthorized use of an opening. While the exit device is still a means of egress, the ALK kit contains an internal horn. When the touch bar is depressed, the horn sounds to provide an audible means of signaling that the opening has been violated. The alarm kit can be armed or disarmed by key. Thus allowing the exit device to be set in an armed or disarmed mode.
98/99™ ELectrical Options Electric Latch Retraction — EL Signal Switch — SS The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging. If manual hex-key dogging is required, specify HD-EL.
98/99™ Electrical Options Electric Mortise Lock Device — E Electric Rim Device — E The electric rim device provides remote locking and unlocking capabilities. A control station operator can flip a switch to lock or unlock the outside trim condition. The 24 VDC solenoid assembly contains a SPDT signal switch to monitor the outside trim condition (locked or unlocked), and a second SPDT signal switch to monitor the latch bolt.
98/99™ Electrical Options The Chexit® Designed for use on delayed exit applications, the Chexit system is ideal for controlled areas. Door Position Input: An external door position switch can be connected to the Chexit. All controls, auxiliary locking, local alarm, and remote signalling are self-contained in the Chexit, providing safe, secure, easy to install and simple to operate door control and exit hardware.
98/99™ Electrical Accessories Electrical Accessories Power Supplies Factory or Field Installed Circuit Cards: 871-2, Two Zone controller provides two inputs and two outputs. Will operate one or two EL exit devices. Use suffix “-2” for factory installed, example PS873-2. 873-AL, Alarm function monitors 1 or 2 zones and provides alarm output, upon detecting a door in the open position. Delayed alarming is selectable from 5 to 75 seconds.
98/99™ Electrical Accessories Electrical Accessories Power Supplies PS861 Power Supply Electrical Power Transfer –– EPT Pneumatic Transfer – PNT Standard UL Listed Class 2, Power Supply UL1012 UL1310 The series PS861 power supply is designed for electric locking or monitoring on single or double door applications. The output power is field selectable for either 24 VDC @ 1 ampere or 12 VDC @ 2 ampere. Standard input 120 VAC @ 0.6 ampere and 240 VAC @ 3.0 ampere available.
98/99™ Options Pneumatic Controlled Exit Devices–PN Less Dogging – LD Less Dogging is available in all 98/99™ Panic Exit devices to remove the dogging option. To Order, Specify: • Use prefix LD, example LD99L The PN feature provides remote latch bolt retraction in hazardous areas where electrically operated devices would not be permitted. The pneumatic solenoid will retract the latch bolt for momentary or prolonged periods. PN exit devices are particularly suited for use with automatic door operators.
98/99™ Options & Accessories Vertical Rod and Latch Guard — RG-27 36" LBR option is available, using a spring loaded auxiliary latch bolt installed in the lower door edge. When exposed to heat the auxiliary latch bolt releases, keeping the doors in alignment and closed during a fire. UL listed 3 hours on hollow metal doors double egress, 90 minute swinging same direction, and 20 minutes wood doors (consult wood door manufacturer). Fits door stiles as narrow as 3⁵ ₈".
98/99™ Accessories and Door Handing Dummy Pushpad The 330 dummy pushpad is designed as a companion unit for all 99 devices. The 350 dummy pushpad is a companion unit for all 98 devices. The pushpad is rigid or nonfunctioning. A push/pull operation can be accomplished by using 990DT, 996DT trim or any Ives Pull. The 330/350 can be equipped with a functional pushpad and will accommodate an RX switch. Specify RX-330. May also be equipped with the RX2, double RX switch. Specify RX2-330 To order, specify: 1.
98/99™ Popular Double Door Applications Popular Double Door Applications Mortise lock and surface mounted or Concealed Vertical rod device combination—same direction Two vertical rods—double egress Two rim devices with mullion— same direction Two surface mounted vertical rod devices—same direction (do not use with overlapping astragal) Auxiliary Fire Latch Two FEH vertical rods with auxiliary fire latch— LBR option 51
98/99™ Finishes A. Center Case Cover B. Touch Bar End Cap C. Touch Bar Trim D. Cover Plate E. Mechanism End Cap F.
98/99™ Additional Information Nomenclature – How To Order EL SD CD CX E EL LX PL PN RX RX2 SS –– Special Dogging - Panic Only — Cylinder Dogging - Panic Only –– Chexit –– Electric Locking (Rim or Mortise) — Electric Latch Retraction — Latch Bolt Monitoring — Pullman Latch –– Pneumatic Latch Retraction — Request to Exit –– Double Request to Exit –– Signal Switch 98 99 — Series 98-smooth — Series 99-grooved None 27 47 47WDC 48 57 75 — Rim Device — Surface Mounted Vertical Rod Device — Concealed Vertical
98/99™ Notes 54 © 2004 Ingersoll-Rand. May be copied for use with specification submittal.
98/99™ Series Exit Devices International Offices Canada / Latin America IR Security & Safety 1076 Lakeshore Road East Mississauga, Ontario, L5E 1E4, Canada (905) 403-1800 (905) 278-1413 FAX (877) 590-4734 North-East Asia IR Security & Safety 23/F, 625 King’s Road Northpoint, Hong Kong +(852) 2235-0600 +(852) 2565-1409 FAX South-East Asia / Australia / NZ IR Architectural Hardware Ltd. P.O. Box 19-347 437 Rosebank Road, Avondale, Auckland, New Zealand +64 (0) 9-829-0550 +64 (0) 9-829-0552 FAX www.
