Instruction Manual

Bracket
Flex Hose
Locknut
Lift Knob
Lift Rod
InSTaLLaTIOn PROCEDuRE
1. Faucet body inStallation
Insert exible hoses and
lift rod through the hole
on deck one at a time
Insert the lift rod from
underside of the faucet
and thread it into the lift
knob.
Slide the bracket into
place and secure the spout
with locknuts
Adjust the spout to face
forward. Hold the spout
in place. Tighten locknuts
Connect ex hoses to
supply lines. Make sure
the left hose connects to
the hot supply line and the
right hose connects to the
cold supply line
4
ENGLISH