Manual

ENGLISH

FAUCET INSTALLATION

Thank you for purchasing this Price Pﬁ ster product. All Price Pﬁ ster products are carefully engineered, and factory tested to

provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow

illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238)

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding.

Price Pﬁ ster recommends calling a professional if you are uncertain about

installing this product!

This product should be installed in accordance with all local and state plumbing

and building codes.

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are

usually found under the sink or near the water meter. If you are replacing an

existing faucet, remove the old faucet from the sink and clean the sink surface

thoroughly.

3 TOOLS RECOMMENDED

• PTFE plumber's tape • Plumber's putty • Slotted screwdriver

• Philips head screwdriver • Pliers • Adjustable wrench

• Flashlight • Cloth

Your installation may require new supply lines and / or shut-off valves or other

additional tools.

4 CHECKING THE CONTENTS OF THE BOX

Upon opening the box, check to ensure that all of the following items are

included.

A Faucet D Putty Plate

B Lift Rod E Pop-Up Assembly

C Wingnuts (2x)

If any of these items are missing, please contact Price Pﬁ ster Consumer Service

at 1-800-Pfaucet (1-800-732-8238).

5 PUTTY PLATE ATTACHMENT

Following manufacturer’s recommendations on use, apply plumber’s putty

into putty groove in bottom of Putty Plate (5A). Install the Putty Plate over the

three holes in your sink.

6 FAUCET INSTALLATION

Insert Faucet Shanks (6A) through the end holes of the sink. Press Deck Plate

(6B) onto Putty Plate (6C).

BOTTOM GROOVE